S2006DRP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S2006DRP is a type of SCR device, which is most commonly used in the industry for various power control applications. It consists of two thyristors (SCRs) and a rectifier in a compact and robust package.

A silicon-controlled rectifier (SCR) is composed of four layers of N-type silicon and is formed in an internal diode network. It is a three-terminal power control device, which can be used as a switch and usually operates in the reverse blocking mode where no current flows through the device in either direction. The data sheet of the S2006DRP specifies its blocking voltage as 200V with a maximum forward current of 25A and a peak reverse current rating of 6A.

A SCR device can be used for a wide range of applications, including for motor control, power factor correction, and light dimming, among many others. The S2006DRP is especially suitable for industrial and commercial motor control applications, due to its enhanced operational characteristics. It is also used for the control of medium voltage power supplies. When used for controlling the flow of electricity, the S2006DRP, like all thyristors, converts AC input power into a DC output power according to the requirements of the application.

The S2006DRP is essentially a three-terminal device, comprising of three pins, each having respective functions. The gate, anode and cathode are the pins respectively, with the gate connection functioning as a control terminal, the anode being the main power terminal, and the cathode making the connection to ground. The SCR can be triggered into operation when the gate is sufficiently forward biased to allow current to flow between the anode and the gate. When this is the case, the gate-cathode junction is normally forced into the reverse-blocking state.

The S2006DRP features a zero voltage gate turn-on facility, which is triggered by applying a signal to the gate of sufficient amplitude to cause the current between the anode and gate to increase with increasing signal frequency. This causes a small reverse current to flow through the gate that is sufficient to trigger the S2006DRP into conduction. It is ideal for controlling applications with high-capacitive or inductive loads, as the gate does not need to be supplied with an adequately large power supply to operate. With the aid of a suitable logic control system, the S2006DRP can be programmed to perform various control functions.

The S2006DRP also has anode and cathode commutation capabilities, meaning it can effectively shut down current flow in either direction. The commutation is an important feature, particularly in applications where the power supply cannot always be shut down. This function is also known as commutation turn-off.

Overall, the S2006DRP is a highly reliable and efficient device, suitable for various power control applications in the industrial and commercial sectors. It is designed to be compatible with both AC and DC power supply systems, and its three-terminal design provides the important control and operational functions for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference