S9S08DZ16F2CLC

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The S9S08DZ16F2CLC is a 8-bit 32 pin MCU designed for the automotive embedded market. It is mainly used for the control interface of the motor control system, body system, safety system, and interior system, providing high-performance and ultra-low-power embedded solutions for the automotive industry.

Application Field

The S9S08DZ16F2CLC has an integrated 2-MByte flash memory for storing program code, an EEPROM for data temporary storage, and a 6-level 16-bit watchdog timer. It provides a wide range of features, such as low-stop mode, high-speed cache, advanced digital modules, pulse-width modulation, one-time-programmable non-volatile memory, and so on.

The onboard controller can support up to 32 input/output pins at the same time, and each pin can provide a variety of combinations. The ADC integrated in the chip can sample 16 channels at the same time and provide 12-bit resolution. In addition, the integrated DAC can provide up to 10-bit resolution for fast speed output.

The motor control system the S9S08DZ16F2CLC is compatible with is mainly used for controlling stepper motors, dc motors, and doing sensorless control, position tracking, and speed control at the same time. It plays an important role in the application of complex driving modes.

In body system applications, the S9S08DZ16F2CLC provides stability and control for the electronic throttle control, airbag control, steering control and door locking systems, and features like low-po structure, mid-range/speed without external memory, and embedded flash memory.

In safety systems, the controller can detect engine operation, speed, temperature, and other factors, and generate the appropriate signals to ensure the safe operation of the vehicle. In interior system applications, the embedded S9S08DZ16F2CLC can provide accurate control of the climate control system, navigation system, in-dash multimedia systems, and navigation system writing massage.

Working Principle

Essentially, the S9S08DZ16F2CLC working principle involves the use of its internal flash memory and EEPROM. Inside the flash memory, instructions, program code and data are stored. When the user presses the "start" button, the controller starts executing instructions from the beginning of the code stored in the flash memory.

Sequential instructions are executed, with each instruction performing a certain action. Meanwhile, the EEPROM, which is a type of non-volatile memory, stores intermediate data and other relevant information, allowing the controller to accurately modify and act according to the stored data.

As part of its working principle, the S9S08DZ16F2CLC incorporates an enable/disable hardware interrupt block to enable user-defined functions. When the relevant hardware interrupt occurs, the controller is interrupted, and the system jumps to the interrupt subroutine for processing. After the corresponding operation is completed, the system returns to the interrupted instruction address to continue running.

The S9S08DZ16F2CLC also uses micro-coders, which are small mini-computer type instruction sets that can operate in parallel and out-of-order. These micro-coders allow the controller to complete complex operations with little external support.

The S9S08DZ16F2CLC also features a low-stop mode, which allows it to continue to maintain a low-power state while consuming less energy. In this mode, the operating frequency is automatically adjusted to the lowest possible value, while maintaining the operating voltage, which means that energy consumption is reduced.

The controller also has the ability to perform various types of analog-to-digital and digital-to-analog conversion, which allow it to accurately monitor, capture and output signals. This can be used for all sorts of applications, from pressure sensors, temperature monitoring and audio processing.

Conclusion

The S9S08DZ16F2CLC is a 8-bit 32 pin MCU designed for the automotive embedded market, providing high-performance and ultra-low-power solutions for motor control systems, body systems, safety systems, and interior systems. It is equipped with an integrated 2-MByte flash and EEPROM memory, a 6-level 16-bit watchdog timer, and sophisticated I/O pins with various combinations. Together with micro-coders, low-stop mode, analog-to-digital conversion, and digital-to-analog conversion, the S9S08DZ16F2CLC is an excellent and resilient choice for automotive embedded solutions.

The specific data is subject to PDF, and the above content is for reference