SBR3U60P5Q-13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SBR3U60P5Q-13 is a diode rectifier that helps protect sensitive components from high-amplitude, short duration surges of current. This particular diode has a maximum reverse voltage of 600V, a forward current rating of 3A, an on-state resistance of 13mΩ and a recovery time of 4 nsec.

The SBR3U60P5Q-13 is used in a wide range of applications and can usually be found in regulated power supplies or HVAC systems. In these types of applications, the diode rectifier helps protect sensitive components and regulate the voltage delivered to them. The diode is also used to protect circuits from over-voltage conditions and short out-of-range pulses.

Other applications for the SBR3U60P5Q-13 include adjustable frequency and voltage regulators, stabilization of power supplies, and various types of motor control. It can also be used in frequency converters and pulse width modulated (PWM) switching circuits.

The working principle of a diode rectifier is relatively simple. When a diode is in forward bias mode (the current flow is in the forward direction), it acts as a low resistance path, allowing current to flow freely through the diode. In reverse bias mode (the current flow is in the opposite direction), the diode acts as an insulator, blocking the current flow. This is why diodes are often referred to as “one-way valves” for electricity.

In the case of the SBR3U60P5Q-13, the reverse voltage and forward current ratings determine the maximum allowable reverse and forward operating voltages. If the voltage across the diode drops below the reverse voltage rating, a short circuit will occur and the diode will no longer be able to protect the connected components from current surges. Similarly, if the current drawn by the diode exceeds the forward current rating, the diode will be unable to stop the flow of current and could be damaged.

The recovery time of 4 nsec indicates the time it takes for the diode to recover from a reverse current flow. This is an important factor when using diodes in applications where there is a chance of high-frequency saw tooth voltages and the diodes must quickly turn on and off. Higher quality diodes usually have shorter recovery times than lower quality diodes.

The SBR3U60P5Q-13 is a versatile diode rectifier that can be used in a wide range of applications. It helps protect sensitive components from voltage surges, regulates voltage delivered to them, and helps stabilize power supplies and motor control circuits. With its 600V reverse voltage, 3A forward current rating, 13mΩ on-state resistance and 4 nsec recovery time, the SBR3U60P5Q-13 is well-suited for applications that require reliable, high quality electronics protection.

The specific data is subject to PDF, and the above content is for reference