SC28L92A1A,529

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SC28L92A1A,529 is a Universal Asynchronous Receiver Transmitter (UART) that is used as an interface between serial communication devices and a microcontroller. It is a two-wire serial data transmitter and receiver, providing transfer rates of up to 5Mbps. It is highly integrated, with a minimal number of external components. The device is highly reliable, with features such as data integrity protection, error correction and data retransmission. It also provides a programmable baud rate generator, an auto-baud feature, flow control and advanced DMA (Direct Memory Access) support.

The SC28L92A1A,529 is typically used in applications such as embedded serial controllers, Industrial Control, Automation, Automotive, CAN networks, Medical and Health Care, and Test and Measurement. Some of its features include: high data rate, excellent signal integrity, error correction and data integrity, advanced DMA support, minimal external components, programmable baud rate, auto-baud feature, and several general purpose settings.

The working principle of the SC28L92A1A,529 is based on the Universal Asynchronous Receiver Transmitter (UART) protocol. This protocol is based on the transmission of data in a series of pulses of a single frequency, using an asynchronous timing mechanism. Each pulse of data is typically 8 bits long and is preceded by a start bit and followed by a stop bit. The pulses are sent in a frame of two or more pulses and the frame is then separated by a silent period of time. The UART protocol is based on a master-slave arrangement, where the master device sends data and the slave device receives it.

The SC28L92A1A,529 receives data in the form of a series of frames, each having a start bit and a stop bit. The data is then checked for errors, and if an error is detected, the data is re-transmitted. After receiving the data, the device then processes it, according to the configuration of the UART protocol. The protocol then transfers the data to the serial port or to a byte-oriented buffer. At the receiver\'s end, the data is assembled, checked for errors and then either processed or stored.

The SC28L92A1A,529 can also operate in a variety of different modes, such as Asynchronous mode, Synchronous mode, and Bit-oriented mode. In Asynchronous mode, the receiver will continuously receive data without any synchronization between the receiver and the transmitter. In Synchronous mode, the transmitter and receiver use a single clock signal to synchronize their operations. Finally, in Bit-oriented mode, the data is sent as a sequence of bits, allowing for more efficient data transmission.

The SC28L92A1A,529 also provides an auto-baud feature, which allows it to automatically detect the baud rate of the communication link and adjust the baud rate accordingly. It also features a programmable baud rate generator and several general purpose settings. Finally, the SC28L92A1A,529 supports both 8-bit and 16-bit data formats, allowing for compatibility with a wide range of applications.

The SC28L92A1A,529 is a versatile and feature rich device, providing a reliable and robust interface between serial communication devices and a microcontroller. It is highly integrated, with a minimal number of external components required. It provides a wide range of features and settings, such as error correction, data retransmission, flow control, programmable baud rate, auto-baud and several general purpose settings. The device is highly compatible, supporting a wide variety of serial communication protocols.

The specific data is subject to PDF, and the above content is for reference