SC28L92A1BS,528

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Interface UARTs (Universal Asynchronous Receiver Transmitter) are used to transmit data between two devices, usually by using a serial communications port. The SC28L92A1BS,528 is one such UART, usually used for serial communication in industrial automation applications. It has a low power consumption requirements and is designed for use in high-volume, low-cost, industrial applications.

The SC28L92A1BS,528 is an 8-bit UART, which means it can send and receive 8 bits of data at a time. The UART has two ports, an input and an output. The input port connects to the device that is sending the data, while the output port connects to the device that is receiving it. The signals sent through the ports are in a serial format, which means each bit of data is sent one after the other in a series of pulses. This makes the data transmission process much more effective, as only a few lines of logic circuitry is needed to ensure correct transfer.

The SC28L92A1BS,528 consists of two components: a controller and a shift register. The controller, or central processor, is responsible for all operations such as receiving, transmitting and storing data. The shift register is responsible for the actual data transfer. It takes data received by the controller, shifts it out of the register one bit at a time and transmits it over the output port. The data is then received by the device connected to the output port and further processed.

The SC28L92A1BS,528 also has several features to help improve its efficiency. These include CRC (cyclic redundancy check) which is used to detect errors in the data transmission process. The UART also has a built-in auto-negotiation function, which enables it to automatically select the correct communication speed and protocol for the connection. Other features include a variable bit rate selection and the ability to switch between 3-wire and 4-wire systems.

The SC28L92A1BS,528 has several advantages over other UARTs. It has better data transfer capabilities due to its higher baud rate (up to 230.4K) and lower start-up time (4-bit mode). In addition, it is more reliable because it has the ability to detect and resolve errors in the data transmission process. Also, its low power consumption requirements make it ideal for industrial applications that require low-cost, efficient data transmission.

The SC28L92A1BS,528 is widely used in a number of different industrial automation applications. It is particularly well-suited for designing and implementing real-time monitoring and control systems, such as those used in industrial automation, process automation and robotics. It is also used in home automation systems and in communication equipment such as modems, ISDN systems and multiplexers. In addition, it is widely used for data acquisition, data loggers and remote measurement applications.

The SC28L92A1BS,528 is a reliable and efficient component for transmission of data over serial communication lines. It has many features that make it well suited for use in industrial automation applications, such as its low power consumption, fast start-up time, error detection and correction functions, and auto-negotiation capability. These features make it well-suited for designing and implementing real-time monitoring and control systems, as well as for data acquisition and remote measurement applications.

The specific data is subject to PDF, and the above content is for reference