Allicdata Part #: | SC28L202A1DGG,118-ND |
Manufacturer Part#: |
SC28L202A1DGG,118 |
Price: | $ 4.66 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | NXP USA Inc |
Short Description: | IC UART DUAL W/FIFO 56-TSSOP |
More Detail: | N/A |
DataSheet: | SC28L202A1DGG,118 Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
2000 +: | $ 4.23139 |
Series: | IMPACT |
Packaging: | Tape & Reel (TR) |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
Features: | Configurable GPIO, Internal Oscillator, Timer/Counter |
Number of Channels: | 1, UART |
FIFO's: | 256 Byte |
Protocol: | RS485 |
Data Rate (Max): | 3.125Mbps |
Voltage - Supply: | 3.3V, 5V |
With Auto Flow Control: | Yes |
With IrDA Encoder/Decoder: | -- |
With False Start Bit Detection: | Yes |
With Modem Control: | Yes |
Mounting Type: | Surface Mount |
Package / Case: | 56-TFSOP (0.240", 6.10mm Width) |
Supplier Device Package: | 56-TSSOP |
Base Part Number: | SC28L202A |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SC28L202A1DGG,118 is an interface device belonging to the UART (Universal Asynchronous Receiver Transmitter) category. It is based on the UART (Universal Asynchronous Receiver Transmitter) protocol developed by Texas Instruments. This device uses a simple and efficient serial communication method to exchange data between processors, devices, and peripherals. Its working principle is to use a chip that is programmable to act as a bridge between different devices used in the system.
The SC28L202A1DGG,118 is designed for use with Texas Instruments\' MSP430 line of microcontrollers (MCUs). The device provides an easy way to connect an MSP430 to serial peripheral devices. It is also convenient for interfacing with FPGAs, CPLD, and programmed microcontroller systems. This makes them capable of implementing a wide variety of applications, including low-level data transmission, sensor reading, output control, etc.
The SC28L202A1DGG,118 uses a 4-wire serial channel with two separate signal pins (TX and RX). The device also includes a dedicated chip enable signal (CE), used as a strobe to start/stop the data transmission. The device supports both synchronous and asynchronous communication modes and provides two signal paths to facilitate bidirectional data exchange. It also has an extended power supply range of 3V to 3.3V, making it suitable for a wide variety of systems.
The SC28L202A1DGG,118’s main application field is for low-level data exchange between digital processors and devices, such as PLCs, sensors, and remote controllers. It can also be used for modbus, low-power serial communication, and remote communication protocols. This device is suitable for a wide range of applications that require both low cost and data exchange speeds, such as remote control, machine control, and automation. This makes the device popular for its flexibility in many industrial applications.
The SC28L202A1DGG,118\'s working principle is based on an internal bidirectional protocol, which provides an interface to the external device. It is used to exchange data between the main processor and other peripherals and devices. The device is capable of running at a high speed and supports half-duplex and full-duplex communication. The device also provides support for I2C, SPI, and other communication protocols. The device is capable of handling data transfer rates of up to 1Mbps.
The SC28L202A1DGG,118 is easy to use, and it is compatible with different devices and operating systems. This makes it an ideal choice for small to medium-sized system applications. It is also an ideal solution for low-level data exchange applications, such as remote control and machine control. The device is also power efficient, with an operating voltage range of 3V to 3.3V and an operating current range of 200mA.
In summary, the SC28L202A1DGG,118 is an interface device in the UART category. It is based on the UART (Universal Asynchronous Receiver Transmitter) protocol and provides an easy way to connect an MSP430 to serial peripheral devices. The device is suitable for a wide range of applications that require both low cost and data exchange speeds, such as remote control, machine control, and automation. It is capable of handling data transfer rates of up to 1 Mbps and is easy to use and compatible with different devices and operating systems. Its main application fields are for low-level data exchange between digital processors and devices and for modbus, low-power serial communication, and remote communication protocols.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SC28C94A1N,112 | NXP USA Inc | 0.0 $ | 1000 | IC UART QUAD W/FIFO 48-DI... |
SC28L91A1A,529 | NXP USA Inc | 0.0 $ | 1000 | IC UART SINGLE W/FIFO 44-... |
SC28L198A1A,529 | NXP USA Inc | 0.0 $ | 1000 | IC UART OCTAL SOT189-3 |
SC28L198A1BE,551 | NXP USA Inc | 0.0 $ | 1000 | IC UART OCTAL 100LQFP |
SC28L198A1BE,528 | NXP USA Inc | 0.0 $ | 1000 | IC UART OCTAL 100LQFP |
SC28L202A1DGG/G:11 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 56-TS... |
SC28L202A1DGG/G,11 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 56-TS... |
SC28L91A1A,512 | NXP USA Inc | 0.0 $ | 1000 | IC UART SINGLE W/FIFO 44-... |
SC28L91A1A,518 | NXP USA Inc | 0.0 $ | 1000 | IC UART SINGLE W/FIFO 44-... |
SC28L92A1BS,557 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 48HVQ... |
SC28L92A1BS,528 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 48HVQ... |
SC28L92A1BS,551 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 48HVQ... |
SC28L92A1A,518 | NXP USA Inc | 4.34 $ | 1000 | IC UART DUAL W/FIFO 44-PL... |
SC28L92A1A,529 | NXP USA Inc | 6.66 $ | 16 | IC UART DUAL W/FIFO 44-PL... |
SC28L92A1A,512 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 44-PL... |
SC28L92A1B,551 | NXP USA Inc | 7.35 $ | 180 | IC UART DUAL W/FIFO 44QFP |
SC28C94A1A,512 | NXP USA Inc | 19.59 $ | 1551 | IC UART QUAD W/FIFO 52-PL... |
SC28L92A1B,557 | NXP USA Inc | 7.35 $ | 255 | IC UART DUAL W/FIFO 44QFP |
SC28C94A1A,518 | NXP USA Inc | 14.01 $ | 1000 | IC UART QUAD W/FIFO 52-PL... |
SC28L194A1BE,528 | NXP USA Inc | 11.63 $ | 1000 | IC UART QUAD W/FIFO 80-LQ... |
SC28L194A1BE,557 | NXP USA Inc | 12.07 $ | 1000 | IC UART QUAD W/FIFO 80-LQ... |
SC28L194A1BE,551 | NXP USA Inc | 16.89 $ | 95 | IC UART QUAD W/FIFO 80-LQ... |
SC28L91A1B,528 | NXP USA Inc | 3.31 $ | 1000 | IC UART SINGLE W/FIFO 44Q... |
SC28L91A1B,551 | NXP USA Inc | 0.0 $ | 1000 | IC UART SINGLE W/FIFO 44Q... |
SC28L91A1B,557 | NXP USA Inc | 0.0 $ | 1000 | IC UART SINGLE W/FIFO 44Q... |
SC28L202A1DGG,118 | NXP USA Inc | 4.66 $ | 1000 | IC UART DUAL W/FIFO 56-TS... |
SC28L202A1DGG,112 | NXP USA Inc | 0.0 $ | 1000 | IC UART DUAL W/FIFO 56-TS... |
SC28L202A1DGG,129 | NXP USA Inc | 0.0 $ | 1000 | IC DUART 3.3V-5.0V 56-TSS... |
SC28L92A1B,528 | NXP USA Inc | 4.66 $ | 1000 | IC UART DUAL W/FIFO 44QFP |
SC28L194A1A,512 | NXP USA Inc | 12.07 $ | 1000 | IC UART QUAD W/FIFO 68-PL... |
SC28L194A1A,518 | NXP USA Inc | 12.69 $ | 1000 | IC UART QUAD 68PLCC |
SC28L194A1A,529 | NXP USA Inc | 14.88 $ | 1000 | IC UART QUAD 68PLCC |
SC28L198A1BE,557 | NXP USA Inc | 19.29 $ | 1000 | IC UART OCTAL W/FIFO 100-... |
SC28L198A1A,518 | NXP USA Inc | 19.29 $ | 1000 | IC UART OCTAL SOT189-3 |
SC28L198A1A,512 | NXP USA Inc | 25.67 $ | 5 | IC UART OCTAL W/FIFO 84-P... |
SC28L201A1DGG,118 | NXP USA Inc | 0.0 $ | 1000 | IC UART W/FIFO 48-TSSOP |
SC28L201A1DGG,112 | NXP USA Inc | 0.0 $ | 1000 | IC UART W/FIFO 48-TSSOP |
AE-SC28U1 | Phyton Inc. | 63.0 $ | 2 | ADAPTER SOCKET 28-SOIC TO... |
SC284ULTRT | Semtech Corp... | 0.48 $ | 1000 | IC REG BUCK PROG 1.8A DL ... |
SC284PULTRC | Semtech Corp... | 0.48 $ | 1000 | IC REG BUCK PROG 2A DL 10... |
IC UART FIFO 16B 32QFN
IC UART FIFO 16B QUAD 48QFN
IC UART CMOS LSI 28PLCC
IC UART CMOS LSI 28PLCC
IC UART I2C/SPI 24TSSOP
IC UART DUAL W/FIFO 48-HVQFN