SDT10A100CTFP

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Configuration:	1 Pair Common Cathode
Diode Type:	Schottky
Voltage - DC Reverse (Vr) (Max):	100V
Current - Average Rectified (Io) (per Diode):	5A
Voltage - Forward (Vf) (Max) @ If:	660mV @ 5A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	50µA @ 100V
Operating Temperature - Junction:	-55°C ~ 150°C
Mounting Type:	Through Hole
Package / Case:	TO-220-3 Full Pack, Isolated Tab
Supplier Device Package:	ITO-220AB

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SDT10A100CTFP

SDT10A100CTFP is a diode array designed for a variety of commercial and industrial applications. It is a small, low power, high current, dual-level rectifier that provides a bridge rectifier for AC applications and can provide the same rectification for DC applications. The rectified DC output can be used to power AC/DC switching power supplies, voltage regulators and other DC/DC power converters.

Key Features of SDT10A100CTFP

The SDT10A100CTFP features low power consumption and high surge current. It is capable of withstanding surge currents in excess of 100A and an operating temperature range of -40°C to +105°C. It has a low reverse leakage current of 5μA, an on-state voltage drop of 0.7V, and a theoretical diode rated working power of 3W. The package provides an insulating case, allowing it to be mounted on heat dissipating surfaces with less worry of accidental electrical shocks.

Applications of SDT10A100CTFP

SDT10A100CTFP is suitable for use in a wide range of industries and applications. It is commonly used for AC bridge rectifier circuits, voltage converters, power supplies, and other AC/DC switching power applications. It can also be used for DC rectifier circuits, such as battery charging, output ripple suppression, and other DC/DC power conversion applications.

Working Principle of SDT10A100CTFP

The SDT10A100CTFP consists of two dual-level rectifier diodes, forming a full-wave rectifier. Each diode, in series, is capable of conducting 200A peak currents and withstands up to 50A of continuous current flow. When an AC voltage is applied, each diode conducts alternately, and rectified output voltage is obtained from the output terminals across the two diodes. The amount of voltage is determined by the magnitude of the AC input voltage. The diodes turn off automatically when the AC voltage reaches zero, preventing reverse conduction and providing inherently low reverse leakage current. To regulate the output voltage, a transformer can be used to connect the AC input and output terminals, with the secondary side of the transformer connecting to the output side of the diode array. This allows for the control of the magnitude of the output voltage.

Conclusion

The SDT10A100CTFP is a versatile, low-power, high current rectifier and diode array that is suitable for a wide variety of industrial and commercial applications. It is capable of withstanding surge currents up to 100A and operates in an operating temperature range of -40°C to +105°C. The low reverse leakage current of 5μA and an on-state voltage drop of 0.7V make it ideal for power-sensitive applications. The rectified output can be used to power AC/DC switching power supplies, voltage regulators and DC/DC power converters.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description