SE70PDHM3_A/H

Series:	Automotive, AEC-Q101, eSMP®
Packaging:	Tape & Reel (TR)
Part Status:	Active
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	200V
Current - Average Rectified (Io):	2.9A
Voltage - Forward (Vf) (Max) @ If:	1.05V @ 7A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2.6µs
Current - Reverse Leakage @ Vr:	20µA @ 200V
Capacitance @ Vr, F:	76pF @ 4V, 1MHz
Mounting Type:	Surface Mount
Package / Case:	TO-277, 3-PowerDFN
Supplier Device Package:	TO-277A (SMPC)
Operating Temperature - Junction:	-55°C ~ 175°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to SE70PDHM3_A/H

SE70PDHM3_A/H is a single diodes rectifier module used in various electronic applications. It is composed of four separate individual diodes in one package and has various features that make it suitable for a wide variety of applications.

Features of SE70PDHM 3_A/H

SE70PDHM3_A/H has many features that make it a desirable choice for use in many different applications. The main features are: • Low forward voltage drop• High efficiency• High surge capability• Low reverse recovery time• Low leakage current• High forward current capability • High peak reverse voltage

Applications of SE70PDHM3_A/H

Due to the range of features of SE70PDHM3_A/H, it can be used in many different types of applications. It is mainly used in power rectification and rectification circuits that require high efficiency, low impedance, and low voltage drop. It is used in wind turbines, solar panels, battery chargers, and other renewable energy sources. SE70PDHM3_A/H is also commonly used in electric vehicles charging systems and electronic devices such as LED lighting and electronic appliances due to its low power consumption.

Working Principle of SE70PDHM3_A/H

SE70PDHM3_A/H follows a bridge rectifier circuit. This circuit is composed of four diodes, two in series and two in parallel. When an AC voltage is applied to the input side, it will be converted to a DC voltage. The DC voltage will then be filtered to remove any components that may cause noise or make the DC voltage unstable. The main purpose of a bridge rectifier circuit is to convert an AC signal into a DC signal. This can be done by the individual diodes allowing current to flow in only one direction and blocking current in the other direction. If the input signal is AC, the rectifier will block the alternate cycles and pass the remaining cycles as DC. The output will then be filtered to remove any noise or ripple.

Conclusion

In conclusion, SE70PDHM3_A/H is a single diode rectifier module composed of four individual diodes that is suitable for many applications due to its low forward voltage drop, high efficiency, and low reverse recovery time. It has many features that make it suitable for use in wind turbines, solar panels, LED lighting, electric vehicles, and other electronic appliances. Its working principle is based on the bridge rectifier circuit, which allows current to flow in only one direction and blocks it in the other direction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description