SET031012

Series:	--
Packaging:	Bulk
Part Status:	Active
Diode Configuration:	--
Diode Type:	--
Voltage - DC Reverse (Vr) (Max):	600V
Current - Average Rectified (Io) (per Diode):	15A
Voltage - Forward (Vf) (Max) @ If:	1.2V @ 9A
Speed:	Standard Recovery >500ns, > 200mA (Io)
Reverse Recovery Time (trr):	2µs
Current - Reverse Leakage @ Vr:	1µA @ 600V
Operating Temperature - Junction:	-55°C ~ 175°C
Mounting Type:	Chassis Mount
Package / Case:	Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays

Rectifier diodes are widely used in fields of electricity where current needs to be converted from AC (alternating current) to DC (direct current). The SET031012 is one such rectifier that has become popular in applications needing its full-wave rectifying ability in order to convert AC power to DC. The key feature of the SET031012 is its ability to allow for low-dropout power conversions, and its low forward voltage drop which permits long current paths. This allows for greater efficiency, as well as less power dissipation. Due to its low power profile, the SET031012 can be used for a wide range of applications.The SET031012 has a three-terminal design which allows for a more efficient and user-friendly installation. It has two outputs with a terminal and emitter sharing each output. The third terminal is the gate terminal, which helps regulate the flow of current as required. In combination with the two outputs, this feature increases the flexibility of the rectifier, enabling it to be used in any application requiring AC to DC conversion.When the SET031012 is energized, it begins to conduct electricity, with the current flowing in one direction. This is known as a half-wave rectifier, where the current is only allowed to flow in one direction and cut off after a half a cycle. This makes it suitable for applications that don’t need a full-wave rectifier, as the SET031012 enables the current to pass through in both directions.The working principle behind the SET031012 is based on its pin voltage. When the voltage applied to the cathode is higher than the voltage applied to the anode, the pin will be in a conductive state causing the current to flow. When the voltage on the anode is higher than the cathode, the pin will be in a non-conductive state, and no current will be flowing. This process is repeated for every half-cycle of the applied AC power, and thus a full-wave rectification is achieved.The SET031012 is also useful in electronic circuits. It can be used as protection devices against reverse current, making it useful for applications such as circuit protection, camera switching, and adjustable current control of electronic components.The SET031012 also has an inbuilt Schottky diode, which acts as an ideal voltage-controlled switch. This diode can be set to provide constant current or constant current/voltage combinations for different circuits. This makes the SET031012 ideal for applications that demand low voltage and constant current.Overall, the SET031012 is a highly versatile rectifier and a must-have component in any power supply design. Its low forward voltage drop, light weight, and easy installation make it the perfect solution for varied applications requiring both AC to DC power conversion and circuit protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description