SI5335C-B02801-GMR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI5335C-B02801-GMR is a part of the silicon Labs family of clock sources, synthesizers, and jitter attenuators. It is based on the Silicon Labs Si5335 family of clock generator ICs, offering a variety of low-jitter output clocks from a single or multiple reference clock inputs, while providing flexibility and a wide range of applications. When it comes to clock/timing components, it is important to make sure you are in the right product family, as different devices are designed for certain applications. The SI5335C-B02801-GMR clock/timing IC is in the Clock Generators, PLLs, Frequency Synthesizers category and offers a wide variety of features and applications. It offers universal frequency control and jitter attenuation capabilities, providing flexibility and low jitter output clocks. The SI5335C-B02801-GMR is designed to be compatible with a wide range of frequency sources, such as crystal oscillators, VCXO, MEMS and GPS. It can generate output frequencies from 0.1 Hz to 200 MHz, as well as can programmable PLLs and VCXO for frequency synthesis and jitter attenuation. The internal feedback components support many low-speed applications and is suitable for both single-ended and differential drivers. The SI5335C-B02801-GMR is suitable for use in a variety of applications, including communications, computing, consumer and automotive electronics. In terms of communications, it can be used for base station and point-to-point radios, broadcast and set-top boxes, and network synchronization. In computing applications, it can be used for digital clocks, embedded controllers and microprocessors to improve system performance. It can also be used in consumer electronics applications, such as digital cameras, DVD players, and handheld devices. In the automotive industry, it can be used in infotainment systems, automotive audio, in-vehicle networking, car navigation systems, and instrument clusters. The SI5335C-B02801-GMR operates via two main components: a voltage-controlled oscillator (VCO) and a phase-locked loop (PLL). The VCO is an oscillator that is controlled by an input voltage, and its output signal will vary based on the input voltage. The phase-locked loop is composed of a phase detector, an RC filter and a voltage controlled oscillator. The phase detector compares the phase of the input signal and the reference signal, then produces an error signal. The RC filter will then modulate the error signal and create a voltage output that is used to control the VCO. The SI5335C-B02801-GMR features a variety of features that provide flexibility in output frequency and jitter attenuation, as well as different types of clock switchover, such as pin-selectable clock selection, pin-selectable clock spiking, and programmable frame synchronization. Additionally, the device can operate in three modes, including Simple Mode, Frequency Synthesis Mode, and Jitter Attenuation Mode. In Simple Mode, output frequencies can be set to one of seven predetermined values. In Frequency Synthesis Mode, programmable PLLs can be used to synthesize any desired output frequency between 0.1 Hz to 200 MHz. In Jitter Attenuation Mode, the device can attenuate jitter from 0.5 – 8ps RMS, depending on the configuration. The SI5335C-B02801-GMR is a flexible clock/timing component that is suitable for a wide range of applications, from communications to automotive. It features a variety of features and modes, such as frequency synthesis and jitter attenuation, as well as programmable PLLs for flexible output frequency. Its features and capabilities make it a great choice for any application that requires a reliable, low-jitter output clock.

The specific data is subject to PDF, and the above content is for reference