SI5335D-B02823-GMR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI5335D-B02823-GMR are clock/timing components that can be used in a variety of applications. This family of components consists of clock generators, phase-locked loops (PLLs), and frequency synthesizers.The SI5335D-B02823-GMR is a low-power, all-digital, 3-channel, PLL-based clock generator. This device provides three factory-programmable outputs, which operate from 8 kHz to 1 GHz. It also provides integrated high-bandwidth jitter attenuators and programmable spread spectrum clock modulation. The high-bandwidth jitter attenuators reduce input jitter, reducing cyclic periods, which can significantly reduce total harmonic distortion. The spread spectrum clock modulation feature helps reduce system EMI noise by dissipating signal energy over several frequencies.The SI5335D-B02823-GMR uses a digitally-controlled phase-locked-loop (DPLL) to synchronize the output clock frequency to an incoming reference waveform. The phase-locked loop performs the multiplication of an input clock waveform by a constant VCO tuning factor. The result is a set of harmonics of the input waveform at VCO frequencies. The phase- locked loop then filters these harmonics and synchronizes the resulting waveform to the input clock waveform. This synchronization allows the output frequency to be accurately tracked to the frequency when the signal is set.The SI5335D-B02823-GMR operates with an internal voltage-controlled oscillator (VCO). The internal VCO provides a wide range of frequencies, with a typical range of 8 kHz to 1 GHz. The device also provides a wide range of values for modulation, frequency shift, and output possible settings.The SI5335D-B02823-GMR has a wide range of applications in embedded systems, networking, and communications. In embedded systems, this device can be used to control the clock frequency of processors, buses, and interfaces. In networking, this device can be used to generate synchronous communication clocks for Ethernet and SONET/SDH networks. In communications, this device can be used to generate G.703 clocks and other high-speed clocks of up to 10 GHz.In summary, the SI5335D-B02823-GMR are low-power, all-digital 3-channel, PLL-based clock generators with high-bandwidth jitter attenuators and programmable spread spectrum clock modulation. This family of devices are suitable for embedded systems, networking, and communications applications. This device can be used to generate synchronous communication clocks for Ethernet, SONET/SDH networks and G.703 clocks, and other high-speed clocks of up to 10 GHz.

The specific data is subject to PDF, and the above content is for reference