SI8640ED-B-IS2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are electronic devices used to transmit electrical signals while providing electrical isolation between two circuits. One of the most common digital isolators is the SI8640ED-B-IS2. The SI8640ED-B-IS2 offers an ideal solution for any application where voltage levels, EMC compliance, or a combination of both are important.

The SI8640ED-B-IS2 is a single-channel digital isolator with a 20V maximum peak voltage. This isolator offers a fast 1500Vrms/sec minimum isolation speed. The SI8640ED-B-IS2 can operate in ambient temperatures between -40°C and +85°C and has a low leakage current rating of 2μA. It also offers a higher level of interference protection than typical digital isolators thanks to its integrated EMC filter.

In terms of application field, the SI8640ED-B-IS2 isolator is most often used in medical devices, industrial automation, energy and power systems, and communication networks. These devices are ideal for use in applications where voltage levels must be kept low, as they help to protect both the connected device and the system as a whole.

The working principle of a digital isolator is based on the magnetic field generated by the current through a coil. The current produces an alternating magnetic field, which in turn induces an electric voltage in the secondary coil. This voltage is then transmitted to the receiver through the isolation barrier.

The two main types of digital isolators are opto-couplers and capacitive digital isolators. Opto-couplers are large packages that contain an LED and a phototransistor in order to transmit the electrical signal across the isolation barrier. They are widely used in computer networks, telecommunications, and other applications that require high levels of electrical insulation between two systems.

Capacitive digital isolators, on the other hand, use a capacitive element in the form of an integrated circuit to transfer the signal between the two circuits. This type of isolator has higher speed and lower power requirements compared to opto-couplers. Additionally, it typically has lower leakage current than opto-couplers, making it suitable for use in medical applications, where leakage current could be an important factor.

In conclusion, the SI8640ED-B-IS2 is a versatile digital isolator that is suited for a variety of applications. It offers high speed, good isolation, and low power consumption, making it suitable for both industrial and medical applications. Additionally, its integrated EMC filter helps to reduce electrical interference, making it ideal for use in critical systems. By utilizing digital isolators, such as the SI8640ED-B-IS2, it is possible to reduce voltage levels, increase system reliability, and improve EMC compliance.

The specific data is subject to PDF, and the above content is for reference