SIP21107DVP-285-E3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SIP21107DVP-285-E3 is a linear voltage regulator featuring an input voltage range of 5.5V to 40V and an output voltage of 2.85V. It is designed for cost-effective and low-noise power supply applications, and with its wide range of input voltage, it can provide a stable output for a variety of applications.

The SIP21107DVP-285-E3 is an adjustable regulator and provides a regulated voltage over a wide range of input and output voltages. The adjustable output voltage can be set using a resistor divider, which is configured to set a voltage between the minimum and maximum output. This makes the SIP21107DVP-285-E3 ideal for powering digital electronics such as microprocessors, memory, FPGAs and ASICs, as well as low-power LED lighting applications.

The SIP21107DVP-285-E3 is a buck voltage regulator which uses a P-channel MOSFET as the main switch and provides a low drop-out (LDO) voltage regulation mode. The LDO mode enables output voltage control with more current, which makes it suitable for low-power applications. The current limiting feature of the device can be adjusted via external resistor divider and the typical current limit ranges from 2.0A to 15A.

The SIP21107DVP-285-E3 also features a programmable soft-start, over temperature, over current, and short circuit protection. The soft-start feature provides a gradual ramp-up of the output voltage, reducing in-rush current, load transients and output overshoot. The over temperature protection monitors the junction temperature and shuts down the device if it exceeds a pre-programmed temperature. The over current and short circuit protection monitors the output current and will shutdown the device if the output current exceed a pre-programmed safey threshold.

Furthermore, the SIP21107DVP-285-E3 is designed to provide high efficiency and low noise power solutions for a multitude of applications. The power efficiency of the device is greater than 90% when operating from the 5.5V to 40V range and switching between 100kHz to 1MHz. The device also provides a low output noise of typically 30mV P-P at 100kHz.

In summary, the SIP21107DVP-285-E3 is an adjustable linear voltage regulator which provides a low drop-out (LDO) voltage regulation mode and is ideal for providing a stable output in a wide variety of applications. With features such as programmable soft-start, over temperature, over current and short circuit protection, the SIP21107DVP-285-E3 is an ideal solution for powering digital electronics such as microprocessors, memory, FPGAs and ASICs, as well as low-power LED lighting applications.

The specific data is subject to PDF, and the above content is for reference