SLPX272M100E5P3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Aluminum electrolytic capacitors are an integral component in many electrical circuits. In particular, the SLPX272M100E5P3 is a popular aluminum electrolytic capacitor used in a variety of applications. This article will discuss the application field and working principle of the SLPX272M100E5P3.

Application Field

The SLPX272M100E5P3 is primarily used in power circuits where high voltage and large currents must be handled safely and reliably. This capacitor is ideal for these applications because it is able to withstand large amounts of voltage, and can handle currents up to 100A. The SLPX272M100E5P3 is also used in high-frequency circuits to reduce electrical noise, which helps to maintain the desired electric signal levels.

Working Principle

The SLPX272M100E5P3 is an aluminum electrolytic capacitor. It consists of two electrodes, the anode and the cathode, separated by an electrolyte. When an electric current is applied across the terminals, a charge is developed across the electrodes and a voltage is induced, creating a capacitor. The current then passes through the capacitor and is dissipated as heat.

The aluminum electrolytic capacitors, like the SLPX272M100E5P3, are made of aluminum foil and an electrolyte solution. The electrolyte allows current to flow through the two plates and dissipate energy, while the aluminum provides support and ensures the capacitor is able to withstand high voltages. The dielectric used in the capacitor is typically an oxide, allowing for greater capacitance values.

When a voltage is applied across the two electrodes, the charge stored in the capacitor increases. This is called “charging the capacitor.” Once the capacitor is charged, it acts as a short-circuit, allowing the current to flow until the voltage is dissipated. This is known as “discharging the capacitor.”

Conclusion

The SLPX272M100E5P3 is an aluminum electrolytic capacitor that is ideal for use in power circuits and high-frequency circuits. It can handle up to 100A of current, as well as high voltages, and can reduce electrical noise. The SLPX272M100E5P3 is composed of two aluminum plates and an electrolyte solution, and works by charging and discharging the capacitor when a voltage is applied to the plates.

The specific data is subject to PDF, and the above content is for reference