SMF54A Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Transient Voltage Suppressors (TVS) are special types of diodes designed to protect sensitive equipment or components against short, high voltage surges. The SMF54A TVS diode is a uni-directional protection device for systems against high voltage transients. It is used in telecom equipment, power supplies, appliances, and other industrial and consumer electronic applications.

The SMF54A is constructed from a combination of planar and diffused layers, which are formed on a semiconductor substrate. A Schottky barrier diode is also formed on the substrate. The SMF54A is designed to withstand a peak pulse power of 90W (10/1000µs waveform) and a peak pulse power of 60W (8/20µs wave form). Its reverse breakdown voltage ranges from 6.5V to 9V depending on the operating temperature of the device.

The working principle of the SMF54A TVS diode is relatively straightforward and simple. When a high voltage transient appears across the terminals of the device, the Schottky barrier diode in the device will immediately turn on. This creates a low resistance pathway for the transient current to flow, resulting in a rapid reduction of the voltage across the terminals of the device. This in turn limits the peak voltage that is allowed to reach the protected system or components, thus preventing any damage due to the transient.

To ensure adequate protection, the SMF54A device is used with an appropriate protection circuit. The device should be connected with a zener diode in parallel, so that the peak voltage can be further limited. The SMF54A TVS diode can also be used in series with a resistor to clamp the high voltage transient, thus protecting the system and components.

The SMF54A TVS diode is an effective solution for protecting sensitive devices and circuits from short, high voltage transients. It is rugged and reliable, and can withstand a peak pulse power of 90W (10/1000µs waveform). The device can be used with an appropriate protection circuit to further ensure reliable protection against transients.

The specific data is subject to PDF, and the above content is for reference