SN74LVC2G53YEPR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC2G53YEPR is an advanced dual-input multiplexer with a single 3-state output buffer. It is part of Texas Instruments\' LVC family of low-voltage CMOS devices and can operate on supply voltages from 1.65 to 3.6 V. This device performs the analog equivalent of a two-input data selector. It selects one of two inputs, determined by the logic state of the select line (S), and presents it to the output buffer (Y). The output buffer can be used to drive either A/D converters or other high impedance inputs. The output is designed to be compatible with both CMOS and TTL logic families.

The SN74LVC2G53YEPR provides two independent, non-inverting multiplexer channels with two data inputs, two select inputs, and one output. The select input (S1 and S2) allows the same data to be sent to two different outputs, or alternate data sources to be sent to a single output depending upon the logic state of the select input. The output of the SN74LVC2G53YEPR will be a 3-state output buffer, meaning that it can be either driven high or low, or its output can float, depending upon the select signal.

The SN74LVC2G53YEPR is mainly used in systems that require simultaneous selection of one or more analog signals from multiple sources. Typical application fields include sample-and-hold systems, automatic test equipment, medical imaging equipment, data acquisition systems, and control systems. The multiple input and output ports of the SN74LVC2G53YEPR, combined with its 3-state output buffer, provide the interface between a wide range of analog and digital systems.

In terms of the working principle, the SN74LVC2G53YEPR multiplexer can be compared to a two-way switch. When a signal is being input into the multiplexer, the select input is used to determine which signal is being selected - A or B. When the select input is low, the output will be A, and when the select input is high, the output will be B. The output of the multiplexer is then buffered so that the signal can be used in either a digital or analog application. Additionally, the 3-state output buffer will allow the output to be open in the event that it is not needed.

The SN74LVC2G53YEPR is an important interface component, especially when it comes to interfacing between analog and digital systems. It can be used in a wide variety of applications, including sample-and-hold systems, automatic test equipment, medical imaging equipment, data acquisition systems, and control systems. This device\'s ability to simultaneously select one or more signals from multiple sources makes it an invaluable asset for most modern systems.

The specific data is subject to PDF, and the above content is for reference