Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

interface drivers receivers transceivers

The SN75161BDWG4 is a dual driver line receiver for balanced/unbalanced Digital Data Interchange (DDI) applications. It is designed to provide full-duplex communication in a variety of data networks, including twisted pair and coax connections. It features low power consumption, low ground current, and high speed operation at a variety of speeds.

Application Field

The SN75161BDWG4 is a two-port line driver line receiver for unbalanced/balanced DDI applications. It is capable of providing full-duplex communication as a transmitter/receiver in a variety of media, including coax and twisted pair. The SN75161BDWG4 can effectively control transmission lines with a minimum of input current swing. The receiver portion of the SN75161BDWG4 line driver line receiver has an input impedance of 400Ω (typical). The transmitter portion of the SN75161BDWG4 line driver line receiver can provide variable output amplitude depending on the input – with peak output amplitudes ranging from 0 V to 4 V (typical), and peak-to-peak output voltage of 8V (typical). The SN75161BDWG4 can also provide auto-sensing operation, allowing for auto-switching between transmitting and receiving data modes.

The SN75161BDWG4 is suitable for a variety of applications, most notably in telecommunications networks, industrial networks, automotive electronics, and other data communication applications. Its flexibility, low power consumption, and robust performance makes it an ideal choice for a variety of DDI applications.

Working Principle

The SN75161BDWG4 operates as a dual line driver line receiver, providing both transmit and receive data functions. In its transmit mode, the SN75161BDWG4 line driver line receiver accepts data from the host system and translates it into signals which are sent out through the output channel. In its receive mode, the SN75161BDWG4 accepts incoming data signals and translates them into electrical signals which are then relayed to the host system. The SN75161BDWG4 can also dynamically switch between transmit and receive modes.

The SN75161BDWG4 line driver line receiver is constructed from two independent transceivers. Each transceiver is composed of two amplifier circuits – one for each data line. One amplifier is used to drive the data out to the transmission medium, while the other amplifies the incoming data from the transmission medium into signals that can be read by the host system. The two amplifiers are driven by a common control signal which can be used to dynamically switch between transmit and receive modes.

The SN75161BDWG4 is designed to achieve low power consumption, low ground currents, and high speed of operation. It is capable of operating up to 1000 Mbps (gigabit Ethernet) speeds with low power consumption of only 80 mW (typical). The SN75161BDWG4 is constructed of low-power CMOS components and is packaged in a VQFN (2-pin) package.

The SN75161BDWG4 is an ideal choice for providing full-duplex communication in a variety of media for digital data interchange applications. Its low power consumption, low ground current, and high-speed operation make it an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference