SN75185N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN75185N belongs to TI\'s line of interface - drivers, receivers, transceivers, which are designed to allow signals to interface between two different systems. As a type of line driver or transceiver, this chip is dedicated to offering a cost-effective solution for systems in need of signal transmission.

The SN75185N is capable of providing a medium-power drive capability at the load side of the system in order to reach different levels of voltage utilized by different systems. It is an 8-pin chip meaning that only 8 external discrete components are strictly required as part of the connection. As such, the SN75185N is particularly suited for designers who wish to minimize their costs. In addition, its low power drain of under 4mA means that the SN75185N is suitable for applications where proper operating efficiency is needed.

This chip contains a total of 4 chipset ICs with the following pins:
- D0 and D1: used to set the terminating voltage
- S1 and S2: utilized for data inputs
- VCC: 5 volt power supply
- GND: connected to the ground of the system
- +IN and -IN: used as the reference voltages around which the terminating voltage can be controlled.
The SN75185N is basically a complementary-output type of line driver, since the output is composed of 2 BJT Transistors, a PNP and an NPN, and the inputs are differential.

The working principle is based on the transconductance theory. The differential signal between the two inputs will be converted into current. This current will then drive both of the outputs, the PNP and the NPN. With its fixed control gain, the chip will provide interference rejection in the presence of any noise signals. If a common-mode voltage is applied to the input, the outputs will be disabled and a low-impedance path is established to the power supply. This feature is useful for the chip\'s enable function to prevent any signal corruption during the enable state.

More specifically, the SN75185N functions as a line driver. It is designed to drive a medium power bidirectional data line and accept a differential signal from the same line. This feature allows for the connection of a medium power bidirectional line to a different bipolar logic system such as RS232. The chip also includes a power-on reset feature that ensures that the output is disabled until the power supply is established. When power is shut down, the output goes to a low state.

When it comes to applications, the SN75185N is most appropriate for systems where bidirectional signal transmission is necessary. This can include serial communication between two systems or any system that requires accurate and reliable data transmission between two points. Such applications could include point-to-point data transmission and wired or wireless data exchange. The SN75185N is also capable of providing a wide range of output voltage levels, allowing the data to interface between different logic levels. The chip operates on the voltage levels set by the D0 and D1 pins, and its low power drain makes it suitable for operating at low supplies.

In conclusion, the SN75185N is a type of line driver or transceiver chip that belongs to TI\'s line of interface - drivers, receivers, transceivers. It is an 8-pin processor capable of providing a medium-power drive capacity at the load side of the system. The SN75185N uses the transconductance theory to convert the differential signal between two inputs into current, which will then drive both of the outputs. This chip is suitable for applications where bidirectional signal transmission is necessary and it is a cost-effective solution for designers who wish to minimize their costs.

The specific data is subject to PDF, and the above content is for reference