SN75ALS057DWR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75ALS057DWR is an integrated circuit (IC) manufactured by Texas Instruments that is a member of their Application Specific Standard Products group. It is an integrated bi-directional, low-level, short-reach transceiver for use in applications such as I/O expansion, data transfer, and multi-camera video systems. The SN75ALS057DWR has both a receiver and a driver, which allows it to transmit and receive data while keeping the data paths between devices separate.

The SN75ALS057DWR transceiver is designed for use in multi-drop systems using a low voltage differential signaling (LVDS) interface. It is useful in applications that require the transfer of data between two or more devices over short distances. The SN75ALS057DWR is a low-power device with a maximum propagation delay of just 50ns. It also features very low quiescent current and is a highly-efficient solution for data transmission applications.

The SN75ALS057DWR is a dual-channel receiver and driver and is compatible with a variety of logic families including TTL, CMOS, LVTTL and HSTL. It supports up to two independent data channels and can work in either one or two receiver and driver configurations. The SN75ALS057DWR has a wide common-mode signal range of 0.6V to 3.5V, with an output signal range of 1.2V to 3.5V. It is designed to operate over a wide range of temperatures and voltages and can withstand a maximum junction temperature of 125°C.

Working Principle: The SN75ALS057DWR is a transceiver that functions as both a receiver and a driver. The receiver converts incoming data signals into logic levels and passes them onto the output while the driver transmits data signals from the input to the output. The transmitter and receiver are completely isolated from each other and cannot interfere or corrupt each other’s signals. The SN75ALS057DWR includes an enable logic function which allows for data transfers to be disabled for increased system control.

The SN75ALS057DWR includes two data paths which can be configured for either single-ended or differential signaling. Single-ended signaling is used when only one signal line is connected from each device to the SN75ALS057DWR, while differential signaling requires two lines to be connected from each device. The SN75ALS057DWR also includes a power-on reset pin to ensure proper operation.

In applications with slow speed data transfers, the SN75ALS057DWR can be used with a single-ended data path configuration. For faster data rates, the SN75ALS057DWR can be used with the differential data path configuration. In this configuration, data is sent and received on the two separate data lines, allowing for increased accuracy and higher data rates. The SN75ALS057DWR is a reliable and efficient transceiver which can be used in a variety of applications that require the transfer of data over short distances.

The specific data is subject to PDF, and the above content is for reference