SN75ALS176PG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75ALS176PG4 is a quadruple low-voltage differential line driver and receiver manufactured by Texas Instruments. This device is capable of operating over the full -0.3V to 7V common-mode voltage range and is designed to interface with single-ended systems. As a differential line driver, the SN75ALS176PG4 is a highly efficient interface, providing flexibility and robustness in noisy applications. There are two principal modes of operation, unidirectional and bidirectional, which can be used for various types of communications, including asynchronous, bit serial, and block serial, over a wide range of data rates. Additionally, it features the industry\'s highest transconductance, allowing the device to operate efficiently over long cables and in systems with impedances up to 50 ohms.In addition to its use as a differential line driver, the SN75ALS176PG4 may also be used as a differential line receiver, providing several advantages over single-ended receivers. It features increased noise immunity, distortion reduction, and higher receiving sensitivity. The SN75ALS176PG4 also supports feedback, allowing the receiver to adapt to different load impedances. Additionally, the device can be used in combination with the SN75ALS176 to provide full-duplex communications over a single pair of wires.The SN75ALS176PG4 is a versatile device and versatile enough to be used in a variety of applications, from high-speed industrial process control to consumer equipment and from medical to automotive applications. The device is designed with an asynchronous interface, allowing for easy integration into microprocessor-based systems, making it perfect for use in embedded applications. Additionally, the SN75ALS176PG4 is designed for reliable operation over a wide temperature range, making it suitable for use in harsh environments. The SN75ALS176PG4 is built using an advanced CMOS process, making it suitable for low-power designs. It features an open collector with a wide common-mode voltage range, allowing it to withstand large noise spikes. Additionally, the SN75ALS176PG4 features high gain, low noise, low input current, and low ground bounce, providing good signal integrity.The SN75ALS176PG4 is a differential line driver and receiver, combining both functions into one device. It uses two signal pairs, one for sending, and one for receiving, making it ideal for a variety of applications. The SN75ALS176PG4 is designed to operate in either unidirectional or bidirectional modes, allowing for asynchronous, bit serial, or block serial communications.In unidirectional mode, the SN75ALS176PG4 acts as a line driver, sending data on the common output line to the receiver. The input pair is used for data transmission, and the device is capable of operating over wide data rates. In bidirectional mode, both the input and output lines are used for data transmission, allowing for full-duplex communications over a single pair of wires. In order to transmit data, the SN75ALS176PG4 uses a pair of transistors, one as a current source and one as a current sink, to shift the output level. The transistors are biased by the supplied voltage VDD, providing both the necessary current and voltage to drive the output. In order to reduce noise and distortion, the device has a built-in transmitter buffer that reduces the output impedance, providing increased signal integrity.The SN75ALS176PG4 also has built-in receiver amplifiers, which are used to sense the differential voltage across the input lines. The output of the receivers is then compared to an internally generated threshold voltage, allowing the device to detect a digital signal on the input. The SN75ALS176PG4 provides an efficient, robust solution for a variety of applications. It is capable of operating over the full -0.3V to 7V common-mode voltage range, allowing for use in noisy or industrial environments. Additionally, the device can be used in a variety of transmission modes, from asynchronous communications to bit and block serial. Additionally, the high gain, low noise, low input current, and low ground bounce of the device provide for reliable operation over long cables. The SN75ALS176PG4 is a cost-effective solution for a variety of transmission needs.

The specific data is subject to PDF, and the above content is for reference