Allicdata Part #: | SPF-2086TK-ND |
Manufacturer Part#: |
SPF-2086TK |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | RFMD |
Short Description: | IC TRANS PHEMT 6GHZ SOT-86 |
More Detail: | RF Mosfet pHEMT FET 5V 40mA 4GHz 18.7dB 20dBm |
DataSheet: | SPF-2086TK Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Transistor Type: | pHEMT FET |
Frequency: | 4GHz |
Gain: | 18.7dB |
Voltage - Test: | 5V |
Current Rating: | 140mA |
Noise Figure: | 0.5dB |
Current - Test: | 40mA |
Power - Output: | 20dBm |
Voltage - Rated: | 7V |
Package / Case: | SOT-86 |
Supplier Device Package: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The SPF-2086TK is a device normally used as a general purpose FET transistor in applications where good frequency response, high power and low noise are required. It is a field-effect transistor suitable for low frequency and frequency modulation applications. It is an RF device with a wide standard package.
The SPF-2086TK transistor is manufactured using an advanced semiconductor process, allowing both good on-state control and off-state protection. It has high breakdown voltage, high gain, and low thermal resistance. It is a robust device suitable for use in most industrial, commercial, military and aerospace applications.
The SPF-2086TK application field and working principle involve two basic types of operation: linear and switching. Linear operation is used to amplify a signal, such as audio, by providing a controlled current gain. Switching operation is used to control the application of power to a signal, turning on and off (or amplifying and attenuating) the signal.
The SPF-2086TK is usually specified with a linear operating range from DC to over 500 MHz, with a power output rating up to 25 watts in the 500 MHz range. In the linear operating range, it can achieve a gain of 13-14dB. When used in switching applications, the SPF-2086TK can achieve a high speed turn-on/turn-off time of 3-10 nanoseconds, with a minimum on/off delay of 5-10 nanoseconds.
When operating in the linear region, the SPF-2086TK transistor works as a current source. The gate-to-source voltage (VGS) determines the drain-to-source voltage (VDS), which controls the amount of current flowing through the device. In this way, the output current can be varied by changing the gate voltage. The SPF-2086TK can be operated in a range of voltage between off and fully on, to produce the desired gain.
In saturation or switch mode operation, the SPF-2086TK works as a voltage controlled current source, where the current flowing through the device is limited by the voltage applied to the gate-to-source terminal. This voltage is set by the user and determines the amount of current that can flow through the transistor.
The SPF-2086TK can also be operated in the linear region at high frequencies, where it offers a better frequency response. In this mode, the frequency response is typically limited to 1MHz, and the Transconductance is limited to 100mA each. This makes the SPF-2086TK suitable for use in amplifier circuits and other applications requiring high frequency performance.
The SPF-2086TK transistor is a versatile device for use in a variety of applications. In linear applications, it can provide good frequency response and high power. For switching applications, its fast switching times, good off-state protection, high voltage gain make it a great choice. It is easily specified by its temperature and operating temperature ranges, and its maximum power output rating.
The specific data is subject to PDF, and the above content is for reference
FET RF 68V 2.16GHZ NI-400RF Mosfet LDMOS...
FET RF 68V 1.99GHZ TO270-4RF Mosfet LDMO...
FET RF 40V 175MHZ TO272-6 WRAPRF Mosfet ...
FET RF 65V 2.17GHZ NI780SRF Mosfet LDMOS...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...
FET RF 80V 1.6GHZ M243RF Mosfet LDMOS 28...