SS12L MTG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SS12L MTG application field and working principle is best understood as part of the diodes, rectifiers and single family. This particular family, of which there can be various shapes and sizes, is used to convert alternating current, or ac, into direct current, or dc. As a general rule, single-rectifiers are devices that allow current to flow in one direction only.

Comprised of a semiconductor p-n junction diode, a single-rectifier diode regulates the flow of current from point A to point B within a circuit. As the forward voltage on the diode increases, it allows a greater flow of current. To learn more about the SS12L MTG application field, a good starting point is the properties of the SS12L MTG single-rectifier diode itself.

The SS12L MTG is a 12A single-phase bridge rectifier diode with a maximum reverse voltage of 1000V and a tunnel diode forward voltage of 1.2V. In addition, the diode has a capacitance of 1.8pF and a response time of 2.5ns. It also offers a long life, high reliability, and minimal heat gain.

In regards to its working principle, single-rectifiers are based on rectification, which is the process of converting alternating current into direct current. Rectification is accomplished by a diode, which allows current to flow in one direction only, while blocking the opposite direction. Because alternating current is constantly changing direction, in order to convert it to direct current, it needs to first be converted to pulsating direct current.

To further understand the SS12L MTG application field and working principle, it is important to consider the three primary mode of operation for a single-rectifier: half-wave rectification, full-wave rectification, and bridge rectification. Half-wave rectification is a process in which only half the incoming ac waveform is passed through the diode, resulting in a reduced-amplitude ac signal. Whereas in full-wave rectification, both positive and negative cycles are passed through the diode, resulting in a full-amplitude ac signal. And in bridge rectification, four diodes are connected in a “bridge” configuration, allowing both halves of the incoming ac waveform to be full passed, thus creating a full-amplitude dc signal.

The SS12L MTG falls into the bridge rectification category, and is specifically used to convert single-phase AC voltage into a DC voltage. As previously mentioned, this conversion is achieved by a semiconductor p-n junction diode, which allows current to flow in one direction only. When the SS12L MTG is installed in a circuit, three of the four diodes allow current to flow in one direction, and the fourth diode prevents current from flowing in the opposite direction. This creates a full amplitude direct current.

In summary, the SS12L MTG application field and working principle fit into the diodes, rectifiers and single family. It is a 12A single-phase bridge rectifier diode with a maximum reverse voltage of 1000V and a tunnel diode forward voltage of 1.2V. It is used to convert single-phase AC voltage into a DC voltage by passing both halves of the incoming AC waveform through the three out of the four diodes. This creates a full amplitude direct current.

The specific data is subject to PDF, and the above content is for reference