SS14 R3G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SS14 R3G is a diode rectifier designed for use in power supplies, power converters and general-purpose rectification applications. This device offers a low forward voltage drop and low leakage current, making it suitable for high current rectification. The SS14 R3G rectifier can handle up to 1.5A of forward current, making it ideal for applications where higher current rectification is desired.

In general, diodes are used to convert alternating current (AC) to direct current (DC). A diode is an electronic component with two electrodes, which acts like a one-way switch, allowing current to flow in only one direction. In the case of rectifiers, current is directed to either one of two possible outputs, depending on the input current polarity. When the current flows from the anode to the cathode, the diode is forward-biased and allows current to flow through it. Conversely, if the current flows in the opposite direction, the diode is reverse-biased, and no current can flow through it. The SS14 R3G is designed to operate in both forward- and reverse-bias.

The SS14 R3G is a single-phase silicon-controlled rectifier (SCR) and consists of three pins: an anode, a cathode, and a gate. The device requires a gate voltage to activate, which can be supplied externally or be derived from the forward current flowing through the device. When the gate voltage is applied, the device switches the current to the anode side and allows it to flow through the diode. The device can then be used to switch the current in both forward- and reverse-bias directions, allowing it to be used as both a diode and a rectifier.

The SS14 R3G is ideal for power supplies and power converters, as it allows for high current rectification at relatively low cost. The low forward voltage drop and low leakage current ensure that the device is efficient and reliable. The single-phase application means that the device is capable of handling high currents without sacrificing efficiency. Additionally, the reverse-biased characteristics of the device mean that it can be used as a protection device for sensitive circuits and components.

Overall, the SS14 R3G is an inexpensive and reliable diode rectifier designed for general-purpose rectification and switching applications. Its low forward voltage drop and low leakage current make it ideal for high current rectification and switching, while its reverse-bias characteristics offer additional protection for sensitive circuits and components. Its single-phase application makes it ideal for power supplies and power converters, providing an efficient and reliable rectification solution at a low cost.

The specific data is subject to PDF, and the above content is for reference