SS14LW RVG

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SS14LW RVG is a single-phase full-wave bridge rectifier module which composed of four schottky diodes (in 1-form-a package). It is widely used in industrial, commercial and automotive applications which require rectification of single-phase (AC) power. The working principle behind the single-phase full-wave bridge rectifier is relatively simple and straightforward.

When a single-phase AC power source is connected to the SS14LW RVG, the four Schottky diodes act as a bridge between the two input leads. The diodes in the bridge form two arms that allow current to only flow in one direction. Depending on the polarity of the input voltage, either the top or the bottom arm of the bridge will conduct, thus the rectified voltage will be in one direction. In order to ensure that both arms of the bridge conduct simultaneously, special controller circuits (such as zero-cross detectors) are often used to switch the polarity of the input voltage at regular intervals.

Such a design allows for a maximum efficiency when converting AC to DC as both positive and negative portions of the AC waveform are rectified. The output from the SS14LW RVG rectifier can be applied to a suitable filter circuit (e.g. low-pass filter) to reduce the resulting ripple and obtain the desired DC output. With its ability to rectify AC power and output an almost constant DC voltage, the SS14LW RVG is a popular and reliable choice for many power conversion applications.

As such, the SS14LW RVG module is an excellent choice for applications ranging from general industrial and automotive, such as AC-DC converters, charging systems, and power supplies, to high-frequency power electronics, such as RF amplifiers, ion thrusters, etc. The module can also be used in solar energy applications where rectifying the AC power from the solar panel is required.

The SS14LW RVG module is highly reliable, efficient and cost-effective for applications where a single-phase full-wave bridge rectifier is needed. It should be noted, however, that its current rating (up to 8A) and voltage rating (up to 150V) mean that the module can only be used for relatively low-power applications, and it is thus not suitable for high-power applications or for applications that require a higher voltage or current rating.

The specific data is subject to PDF, and the above content is for reference