SS36 M6G

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Not For New Designs
Diode Type:	Standard
Voltage - DC Reverse (Vr) (Max):	60V
Current - Average Rectified (Io):	3A
Voltage - Forward (Vf) (Max) @ If:	750mV @ 3A
Speed:	Fast Recovery = 200mA (Io)
Current - Reverse Leakage @ Vr:	500µA @ 60V
Capacitance @ Vr, F:	--
Mounting Type:	Surface Mount
Package / Case:	DO-214AB, SMC
Supplier Device Package:	DO-214AB (SMC)
Operating Temperature - Junction:	-55°C ~ 150°C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

In the modern semiconductor industry, M6G Single-Phase Bridge Rectifiers are one of the types of diodes commonly used in electrical and electronic circuits. Specifically, a single-phase full bridge rectifier is an arrangement of four diodes connected together in a bridge configuration, allowing unidirectional current to flow within the circuit.

The SS36 M6G Rectifier Diode

The SS36 M6G is a single-phase bridge rectifier diode from the M6G family that has been designed with a wide range of applications in mind. It has a maximum forward current rating of 3.0A and a peak surge current of 16.0A. Its maximum reverse voltage rating is 1000 V and its junction temperature is 150°C. Its high surge forward current rating, along with its industry-standard design, make the SS36 M6G an ideal choice for high-reliability and cost-effective applications.

Application Field for the SS36 M6G Rectifier Diode

The SS36 M6G rectifier diode is used in a variety of power supply, DC motor and AC motor control, and switching applications. It is also commonly found in inverter applications and some HVAC systems. Additionally, its industry-standard design makes it versatile enough to be used in other general-purpose applications. The SS36 M6G is a good choice for electronic and electrical circuits where reliable and low-cost rectification is required.

Working Principle of the SS36 M6G Rectifier Diode

The working principle of a single-phase bridge rectifier using the SS36 M6G rectifier diodes is straightforward. As the current flows through the bridge circuit, both the anode and the cathode are connected in pairs. This allows the current to always flow in one direction, from the negative terminal to the positive terminal. The four diodes form the bridge, which is then further connected to a power supply and the load. The anode and the cathode of each diode form a closed loop, which then converts the AC current into DC current. The imported AC voltage is then transmitted through the bridge circuit and by the time it is transmitted to the load, the AC voltage has been converted into DC voltage, allowing it to be used in the intended applications.

Conclusion

The SS36 M6G rectifier diode is part of the M6G family of diodes that is commonly used in a variety of electronic and electrical circuits. It is highly versatile and is suitable for a wide range of applications. It is ideal for use in power supplies, DC motor, AC motor control, and switching applications, and can also be used in inverted and HVAC applications. In addition, the SS36 M6G has a maximum forward current rating of 3.0A and a maximum reverse voltage rating of 1000V and is capable of handling a surge current of 16.0A. It is an industry-standard design that is reliable and cost-effective, making it an ideal choice for many applications. Finally, the working principle of the SS36 M6G rectifier diode is explained, highlighting the simplicity of its design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description