SSM1-152P-05T6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are devices that are designed to remove electromagnetic interference (EMI) or radio frequency interference (RFI) from electrical signals. They are usually used in electronic devices such as radios, television sets, and computers, in order to limit unwanted noise from being introduced into the device. One of the most common types of EMI/RFI filters is the LC network, which is composed of inductors and capacitors that act as both a high-pass filter and a low-pass filter. These LC networks can be used to filter out low frequency or high frequency noise that may interfere with the normal functioning of the device.

The SSM1-152P-05T6 is an EMI/RFI filter designed for use in audio equipment. It is a two-part filter consisting of an inductor and capacitor in an LC network configuration. It is designed to remove noise at frequencies in the range of 6 kHz to 500 kHz. The inductor is a ferrite core type with two leads, while the capacitor is a MKT type with two leads. It is designed to have a wide-band attenuation of more than 40 dB, and uses two 7.62 mm pins for mounting.

The SSM1-152P-05T6 filter is mainly used in professional audio equipment where noise needs to be minimized in order to assure high sound quality. It is also used in consumer audio equipment such as home theatre systems, car stereos, and portable audio players. It is designed to be as compact as possible, and can easily fit into the limited space available in these types of devices. Additionally, it is designed to be durable and resistant to environmental changes such as temperature and humidity.

The working principle of the SSM1-152P-05T6 filter is based on the concept of inductive reactance and capacitive reactance. Inductive reactance is the opposition to the flow of alternating current in an inductor, while capacitive reactance is the opposition to the flow of alternating current in a capacitor. These two reactances interact and form an LC network, which is used to filter out frequencies that are outside the desired range. The inductor and capacitor in the filter act as frequency-dependent resistors that oppose the current flow at frequencies above or below the passband. This creates a sharp attenuation at the edges of the passband, allowing only frequencies within the desired range to pass through the filter.

The SSM1-152P-05T6 filter is a great choice for those who need to reduce noise in their audio equipment. It is designed to be durable, compact, and resistant to environmental changes. It has a wide-band attenuation of more than 40 dB, and is capable of filtering out frequencies in the range of 6 kHz to 500 kHz. This makes it suitable for most audio applications, and it can be mounted easily in most devices.

The specific data is subject to PDF, and the above content is for reference