SSM1F-202P-05B

Current:	5A
Height:	0.087" (2.20mm)
Size / Dimension:	0.315" L x 0.083" W (8.00mm x 2.10mm)
Package / Case:	Pill, Square
Mounting Type:	Surface Mount
Voltage - Rated:	100V
Applications:	Data Lines for Mobile Devices
Operating Temperature:	-55°C ~ 125°C
ESD Protection:	No
Values:	C = 2000pF
Series:	SSM
Resistance - Channel (Ohms):	--
Attenuation Value:	--
Center / Cutoff Frequency:	--
Number of Channels:	1
Technology:	LC (Pi)
Filter Order:	3rd
Type:	Low Pass
Part Status:	Discontinued at Digi-Key
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SSM1F-202P-05B application field and working principle

Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) Filters are used in both residential and commercial electronics-related systems as a preventive measure against electrical noise pollution. The SSM1F-202P-05B is an EMI / RFI Filter designed to reduce common-mode and differential-mode noise emissions. This type of filter is designed to reduce the amplitude of EMI / RFI signals while maintaining the desired frequency characteristics of the signal.

The SSM1F-202P-05B filter is a Low-Pass and High-Pass (LP/HP) filter in a 8-pin surface mount package. It is designed to be used in communication and networking applications where the environment or application is subject to EMI / RFI noise sources that can potentially interfere with the desired signal. The resonant circuit of the SSM1F-202P-05B filters out the undesired EMI / RFI frequencies while allowing the desired signal to pass. The filter also has the capability to provide protection from electrostatic discharge (ESD) up to 4KV.

The SSM1F-202P-05B filter is a general-purpose Low-Pass / High-Pass filter based on the LC component network. The component design uses inductor-capacitor (L-C) components to form an electrical resonance circuit which is the basis for this type of filter. The resonance circuit is designed to reduce the amplitude of any signals that are outside of the passband range. The passband is the frequency range in which the desired signal is allowed to pass through the filter.

In addition to the LC network, the SSM1F-202P-05B filter also contains a resistor network within its design. The resistor network helps to dampen the resonance circuit and reduce any unwanted peaks or over-amplified frequencies within the signal as it passes through the filter. This helps to ensure that both common-mode and differential-mode signals are adequately filtered before reaching the destination device. The resistor network also provides protection from the ESD affects by helping to filter any noise caused by ESD events.

The SSM1F-202P-05B filter is designed for use in a wide range of applications. The filter is commonly used in electronics-related systems such as networked computer systems, telecommunication systems, and electronic medical equipment that are subject to various levels of EMI / RFI interference. Due to its small footprint, the filter can also be used in space-constrained IT devices. Additionally, the filter is designed to withstand high-temperature attacks, providing an extra layer of protection for the application.

The SSM1F-202P-05B filter provides superior protection from EMI and RFI interference. Its small form factor and easy-to-install design make it an ideal solution for any electronics-related system. The filter is designed for high-temperature operations and also provides protection from electrostatic discharge events. By helping to reduce the amplitude of EMI / RFI signals, the SSM1F-202P-05B filter helps to ensure that the desired signal is able to reach its intended destination without any interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description