SSM1-402Z-10T1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

EMI/RFI filters are designed to suppress electromagnetic interference (EMI) and radio frequency interference (RFI). To fulfill this task, they use electrically connected passive components to form an LC network - capacitors and inductors - that will attenuate the undesired signals. The size and complexity of the LC networks vary with application and performance goals. The SSM1-402Z-10T1 EMI/RFI filter is a popular device used in a wide range of applications and assemblies.

The SSM1-402Z-10T1 is a small-footprint, two-pin filter with four sections of LC networks. It offers attenuation of EMI/RFI noise between 1MHz to 40MHz, with a width of just 6.7mm. Power limits are 10A at 100VAC to 1000VAC, depending on the application. Typical insertion loss is 1.5dB maximum at 1MHz to 40MHz. The device\'s wide frequency range makes it suitable for use in a variety of applications, from industrial, medical to consumer electronics.

The SSM1-402Z-10T1\'s design is built on a proprietary technique called Frequency Selective Circuit (FS Circuit), which has been proven to provide superior performance over other types of EMI filters. It uses a combination of dispersed capacitors and inductors in a precisely calculated configuration which ensures effective suppression of EMI/RFI interference. It also allows for the use of high-frequency capacitors, such as ceramic capacitors, to achieve a high level of attenuation.

The supression of EMI/RFI interference is achieved by the SSM1-402Z-10T1 in two ways. First, it stops the flow of electric current within the circuit. Second, there is a deliberate impedance mismatch, forcing any signals that pass through to be distorted and weakened before they reach the circuit board. The frequency of the electrical signal has a huge impact on its ability to pass through the filter. For signals within the filter\'s frequency range, they are greatly reduced. However, signals that are outside the range of the filter will not be affected.

The SSM1-402Z-10T1 is a versatile, reliable and robust EMI/RFI filter that is used in a variety of applications. From industrial, automotive, medical to consumer electronics, it offers a reliable and compact solution for high-frequency EMI and RFI issues. Its frequency selective feature allows for an effective response over a wide range of frequencies, while its four-section LC network provides an effective solution for EMI/RFI supression.

The specific data is subject to PDF, and the above content is for reference