Allicdata Part #: | 497-2086-5-ND |
Manufacturer Part#: |
ST485ERBN |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC TXRX LOPWR RS485/422 8-DIP |
More Detail: | 1/1 Transceiver Half RS422, RS485 8-DIP |
DataSheet: | ST485ERBN Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tube |
Part Status: | Obsolete |
Type: | Transceiver |
Protocol: | RS422, RS485 |
Number of Drivers/Receivers: | 1/1 |
Duplex: | Half |
Receiver Hysteresis: | 70mV |
Data Rate: | 2.5Mbps |
Voltage - Supply: | 4.75 V ~ 5.25 V |
Operating Temperature: | -40°C ~ 85°C |
Mounting Type: | Through Hole |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Supplier Device Package: | 8-DIP |
Base Part Number: | ST485ER |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RS485 is a reliable asynchronous serial data transfer standard for the digital information exchange between devices and peripherals. It is a great choice for industrial and commercial applications when the information needs to be transferred over long distances, typically as far as 1.2 km. The RS485 protocol is mostly used to connect several digital sensors or equipment to a centralized controller in automation or for communication purposes between several remote nodes. RS485 transceivers are highly appreciated for their great range, high speed and fast response time.
The ST485ERBN is a physical interface device that implements the communication layer between control and slave networks. It is a highly integrated, low-power, cost-effective circuit that supports up to 4.8 Mbps in read/write cycle and up to 32 master nodes. It is a four-channel (UART, I2C, SPI, and GPIO) serial port adaptor with a fast and accurate motion control processor.
The ST485ERBN is primarily used in industrial automation, transportation, and telecommunication networks such as PLCs (programmable logic controllers) and HMIs (human-machine interfaces). It has been designed for applications requiring the transfer of digital data between devices on a network. Its applications include the control of a variety of devices from a central point, such as robots and automated warehouses. It is also used in medical equipment, in smart homes, and in the automotive industry.
In terms of working principle, the ST485ERBN acts as a bridge between two nodes - the master node and the slave node. It can be configured to operate as either a two-wire full-duplex or a four-wire full-duplex system. The device also supports multiple types of communication protocols, including RS485, UART, I2C, and SPI, allowing for seamless integration with different platforms.
When fitted with the appropriate shift register, the ST485ERBN automatically manages the data transfer. The RTL (Round Trip Latency) is monitored by this device showing the real-time status of the communication. It allows for industrial networks equipped with low-cost transceivers that are reliable and fast. In addition, the ST485ERBN has an integrated watchdog timer and a set of protection mechanisms that help to prevent errors when dealing with data transmission and reception over a wide range of operating parameters.
In conclusion, the ST485ERBN is a modern and cost-effective transceiver solution primarily used in industrial automation and transportation networks. It operates on a two-wire or four-wire system and supports various communication protocols including RS485, UART, I2C, and SPI. The device also features an integrated watchdog timer and a set of protection mechanisms that ensure the accuracy, reliability and speed of data transmission and reception. Thanks to these features, the ST485ERBN is an ideal choice for applications requiring the transfer of digital data between multiple devices on a network.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ST483616SS | Hammond Manu... | 0.69 $ | 1000 | BOX S STEEL NAT 53.8"L X ... |
ST483610LG | Hammond Manu... | 399.6 $ | 1000 | BOX STEEL GRAY 51.6"L X 3... |
ST483612LG | Hammond Manu... | 416.78 $ | 1000 | BOX STEEL GRAY 52.3"L X 3... |
ST483616LG | Hammond Manu... | 457.36 $ | 1000 | BOX STEEL GRAY 53.7"L X 3... |
ST485CDR | STMicroelect... | 0.27 $ | 1000 | IC TXRX 5V RS485/422 LP 8... |
ST485ABDR | STMicroelect... | 0.43 $ | 1000 | IC TXRX HS LOPWR RS485/42... |
ST485ECDR | STMicroelect... | -- | 1000 | IC TXRX 5V RS485/422 ESD ... |
ST485EBDR | STMicroelect... | -- | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485BDR | STMicroelect... | -- | 1000 | IC TXRX 5V RS485/422 LP 8... |
ST485ERBDR | STMicroelect... | -- | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485EXDR | STMicroelect... | 0.62 $ | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485ERXDR | STMicroelect... | 0.0 $ | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485BD | STMicroelect... | 0.0 $ | 1000 | IC TXRX RS485/422 LP 8-SO... |
ST485ERXN | STMicroelect... | 0.0 $ | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485EXN | STMicroelect... | 0.0 $ | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485ERBN | STMicroelect... | -- | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485EBN | STMicroelect... | -- | 1000 | IC TXRX LOPWR RS485/422 8... |
ST485ABN | STMicroelect... | -- | 1000 | IC TXRX RS422/485 50MBPS ... |
ST485BN | STMicroelect... | 0.0 $ | 1000 | IC TXRX RS422/485 2.5MBPS... |
ST485CN | STMicroelect... | 0.0 $ | 1000 | IC TXRX RS422/485 2.5MBPS... |
ST485ECN | STMicroelect... | 0.0 $ | 1000 | IC TXRX RS422/485 2.5MBPS... |
ST485XN | STMicroelect... | 0.0 $ | 1000 | IC TXRX RS422/485 5MBPS 8... |
IC transceiver Automotive Local Intercon...
LIN Transceiver Automotive System Basis ...
IC TRANSCEIVER 1/1 8SOIC,AEC-Q100
IC TXRX MULTIRATE 16BIT 208-BGA1/1 Trans...
IC TXRX CAN HS 5.25V 8-SOIC1/1 Transceiv...
IC CAN TRANSCEIVER HS 8-SOIC1/1 Transcei...