STE10000-10T4MI

Operating Temperature:	-55°C ~ 125°C
Failure Rate:	--
Features:	Wet Tantalum
Manufacturer Size Code:	T4
Lead Spacing:	--
Height - Seated (Max):	--
Size / Dimension:	0.406" Dia x 1.062" L (10.31mm x 26.97mm)
Package / Case:	Axial
Mounting Type:	Through Hole
Lifetime @ Temp.:	--
Series:	SuperTan®, Extended STE
ESR (Equivalent Series Resistance):	250 mOhm
Type:	Hermetically Sealed
Voltage - Rated:	10V
Tolerance:	±20%
Capacitance:	10000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Tantalum Capacitors

Tantalum capacitors are electrical components that store energy in a form of an electrical charge. They are used in electronic circuits, where they act as a buffer, storing and releasing energy. These components are composed of two metallic plates separated by a dielectric material. A tantalum capacitor is typically cylindrical in shape with a threaded end, making it easy to attach to other components or circuit boards. It is a type of non-polarized capacitor, meaning it can be reversed without suffering damage.

FORMATION OF TANTALUM CAPACITOR

Tantalum capacitors are formed in one of two ways. The first method is called wet-forming, which involves dipping the components in a wet chemical solution. This process facilitates better electron circulation and prevents any shorted circuits. The second fabrication method is called dry-forming. In this process, a powder-like substance is poured in between the two plates. This allows for greater conduction but can be prone to the risk of internal shorting caused by dust particles from the powder that gets stuck in the device.

STRUCTURAL CONFIGURATIONS AND INTERNAL COMPONENTS

Tantalum capacitors come in two structural configurations: wet and dry. Wet-formed tantalum capacitors are sealed in an epoxy casing and are the most common type. The case holds the components together and prevents any moisture and foreign particles from entering the capacitor. Dry-formed capacitors, on the other hand, are made from a single unit containing two metallic plates and a dielectric material. This makes them more cost-effective but can lead to capacitance leakages.

APPLICATIONS OF TANTALUM CAPACITOR

Tantalum capacitors are used in a wide range of electronic circuits and applications. They are primarily found in computers, where they maintain a steady voltage source, and also in amplifiers, where they control the amount of power that is supplied to the circuit. Additionally, they are used in automotive systems as they provide a reliable source of current for the ignition system. Mobile phones also rely on these components for their reliable power output.

STE10000-10T4MI APPLICATION FIELD AND WORKING PRINCIPLE

The STE10000-10T4MI is a multi-anode tantalum capacitor. It is one of the most reliable components for power management in modern electronics. The component features two anodes with a maximum capacitance of 10,000µF. It is rated for a maximum working voltage of 4V. The STE10000-10T4MI is often used in applications such as energy storage, power polarity protection, and filtering. To ensure that the component works reliably under high workloads, the component is equipped with a premolded protection ring to prevent short circuits. The component utilizes electrolytic dielectric material which helps to increase capacitance values.

CONCLUSION

Tantalum capacitors are essential components used to store and release energy in electronic circuits. The STE10000-10T4MI is a multi-anode component that utilizes electrolytic dielectric material to increase capacitance values. This makes it one of the most reliable components for power management and filtering. It is often used in computers, automotive systems, and mobile phones.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description