Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

T627121584DN is a surface-mount control SCR equipped with a choice of zero-crossing and non-zero-crossing gate trigger circuits. This SCR is easy to install and maintain given its robust, surface-mountable design. It is also capable of withstanding high temperature and high current ratings with minimal losses. The major application fields include AC static switches, motor speed control and power supplies.

Working Principle

Like other thyristors, the basic action and construction of the T627121584DN are similar. A thyristor is a solid state semiconductor device with four layers of alternating P-type and N-type materials. These layers form two junctions, known as the Anode and Gate junctions, which act as current and voltage regulators. The Anode junction will only allow current to flow in one direction and the Gate junction limits the potential difference between the Anode and Gate. When the Gate junction impedes, the Anode junction switches off, therefore the SCR acts as an electronic switch.

The T627121584DN is a zero-crossing and non-zero-crossing gate trigger SCR. The Gate junction voltage of a zero-crossing SCR remains high until the forward Anode current reaches the predetermined gate current threshold, at which point the gate junction voltage is reduced to zero and the SCR triggers. Non-zero-crossing SCRs, on the other hand, require a little more effort to activate. The Gate junction voltage is reduced to a level, known as the holding level, to turn on the SCR: until the Anode current reaches this threshold, the SCR remains off. In both types of SCRs, once the voltage is reduced, current is allowed to flow until the Anode current drops back below the holding level. The SCR then returns to its non-conductive state and the cycle is repeated.

Application Fields

The most common application of SCRs is in AC static switches. SCRs are usually used in pairs as back-to-back switches as they are capable of responding to small voltage changes over a wide temperature range. They can be used to provide total isolation and consistent voltage control to the connected AC load. SCRs can also be used as motor speed controllers and to protect power supplies from high voltage spikes.

The T627121584DN was specifically designed for use in thermal systems such as air conditioners and freezers. With a relatively low cost and a minimal power consumption requirement, it is particularly suited for equipment that requires a frequent voltage change.

The T627121584DN is also used in industrial equipment where precise temperature control is crucial. Its robust construction and wide temperature range make it an ideal choice for applications that require long-term reliable operation.

Conclusion

The T627121584DN is a surface-mount control SCR with zero-crossing and non-zero-crossing gate trigger circuits. It is a reliable and durable component with a minimal power consumption requirement. Its major application fields include AC static switches, motor speed control and power supplies, as well as thermal systems and industrial equipment. It is an ideal choice for applications that require precise temperature control over a long period of time.

The specific data is subject to PDF, and the above content is for reference