TC75S58FUTE85LF Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - comparators are commonly used in a variety of applications such as measuring the voltage of a circuit or comparing two inputs. The TC75S58FUTE85LF is a linear comparator which is capable of providing accurate and reliable performance in a wide variety of applications.

The TC75S58FUTE85LF is a monolithic, Single Supply Compare Logic (SCL) device which uses an n-p-n transistor for the voltage comparison. The device supports operation up to 15V and includes a voltage reference equal to the supply voltage. The output of the device is a logic equivalent CMOS output which is provided in a standard 14-SOP package.

The device can be used for a wide range of applications, such as voltage measurement, overvoltage and undervoltage protection, logic level shifting, and logic conversion. It can also be used for voltage regulation and monitoring, or as a limit switch in microcontroller or control applications. It has an open drain output that can be used as an active-low output or an active-high output depending on the configuration of the device.

The TC75S58FUTE85LF is designed to be extremely accurate and provide stable operation. The device can operate across a wide temperature range and its error value is quite small. It is also capable of operating in an instantaneous or hysteresis mode, allowing it to be used in applications that require level-shifting or hysteresis.

In terms of its working principle, the device uses an n-p-n transistor for the voltage comparison. The input terminals of the device are connected to the base of the transistor and its output terminal is connected to the collector of the transistor. A voltage reference is also connected to the base of the transistor and its output is fed to the collector. When the voltage at the input terminals is greater than the reference voltage, the transistor will be driven into saturation and the output will be high. When the voltage at the input terminals is lower than the reference voltage, the transistor will be cut-off and the output will be low. This process is the basis for the comparison logic of the device.

The TC75S58FUTE85LF is a reliable and accurate linear comparator which is suitable for a wide range of applications. Its single supply operation and easy configuration make it an attractive device for a variety of system requirements. It is a highly accurate device and can be used as an overvoltage or undervoltage protection device, a logic level shifting device, a limit switch for microcontroller applications, or for voltage regulating and monitoring.

The specific data is subject to PDF, and the above content is for reference