TC75S60FU(TE85L,F)

Voltage - Input Offset:	2mV
Base Part Number:	TC75S60
Supplier Device Package:	USV
Package / Case:	5-TSSOP, SC-70-5, SOT-353
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	1.8 V ~ 7 V, ±0.9 V ~ 3.5 V
Current - Output / Channel:	1.25mA
Current - Supply:	330µA
Series:	--
Current - Input Bias:	1pA
Slew Rate:	5.1 V/µs
Output Type:	--
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The TC75S60FU (TE85L,F) is a linear amplifier specifically designed for the field of instrumentation, operational amplifiers, buffered amplifiers, and other linear applications. It is an integrated circuit with an input resistance of 16 KΩ and a voltage noise level of 1.5 μV. The amplifier can operate on an input voltage range of ±18 V to ±30 V and a wide range of temperatures. It has a large bandwidth of 180 kHz and a closed-loop gain as high as 70 dB. The open-loop gain is 110 dB with a slew rate of 40 V/μs. The device is also highly reliable and its life expectancy exceeds 500k hours.

Working Principle

The main purpose of the TC75S60FU (TE85L,F) amplifier is to couple the input voltage differential signals to the output stage by in order to achieve the desired operation characteristics. This device consists of three main stages, the front-end differential amplifier, the voltage-gain stage, and the output stage. At the input stage, two differential signals enter the amplifier and are split by the differential amplifier. The split signals are sent to two operational amplifiers for further amplification. The output voltage of the operational amplifier is then passed to the voltage-gain stage and amplified by two differential amplifiers. The two amplifiers are connected in parallel and the output of the two is then combined and fed to the output stage. At the output stage, the combined signal is amplified by two voltage-gain amplifiers and the output is then sent to the load. Depending on the desired gain and output, the output stage can be designed with single-pole or double-pole configurations. The single-pole configuration increases the gain of the voltage-gain stage and reduces the output impedance. The double-pole configuration decreases the gain of the voltage-gain stage but increases the output impedance. In addition, the output signal can be further amplified by a power amplifier for higher power applications.

Applications

The TC75S60FU (TE85L,F) amplifier is mainly used for signal conditioning, signal amplification and buffer applications. It is suitable for a wide variety of applications such as instrumentation, communication systems, industrial process control, aerospace, and general-purpose applications. Instrumentation: The amplifier is mainly used in the field of instrumentation to measure the temperature, pressure, flow and other physical parameters. It is used to convert the input voltage signal into a high gain balanced signal which can be easily read by the instrumentation system. Communication: The amplifier is also used in communication systems to amplify the signal, reduce distortion and maintain a good signal-to-noise ratio. It is mainly used in radio frequency applications. Industrial Process Control: The amplifier is used to sense, monitor and control the parameters in the industrial processes such as temperature and pressure. It can be used to facilitate the control of the production process in the chemical, pharmaceutical and other industries. Aerospace: The amplifier is used to match the input and output signals in the radar and navigation systems. It is also used to stabilize the system parameters during flight.

Conclusion

The TC75S60FU (TE85L,F) amplifier is an integrated circuit specifically designed for a wide range of linear applications such as instrumentation, communication systems, industrial process control, and aerospace. It consists of three main stages: the front-end amplifier, the voltage-gain stage, and the output stage. It provides a high input impedance, low voltage noise, and high reliability. It can be used to amplify the input signal, reduce distortion, and maintain a good signal-to-noise ratio. It is also capable of providing a stable output signal in various temperature ranges.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description