TCG252U050N2L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, such as TCG252U050N2L, are widely used electronic components to store energy in the form of electrical charge. They are the most commonly used type of capacitor and usually have large capacitance values compared to other types of capacitors. They consist of two thin and highly conductive aluminum foils separated by a paper insulation and filled with an electrolytic solution. This solution acts as a dielectric that increases the capacitance of the capacitor.

The main application of TCG252U050N2L is as an active device in switching power supplies, motor controllers, surge protectors, and peak current/voltage limiters. It is also suitable for use in high frequency rectification circuit, radio frequency signal and voltage surge protection. Due to their relatively low cost and large capacitance range, these capacitors are often used in power supplies to filter out high frequency noise and stabilize the output voltage.

The working principle of TCG252U050N2L is based on the same principles as any other capacitors: when a potential difference is applied across the two plates, charge is stored on either plate and the capacitance increases. The amount of charge stored is dependent on the size of the plates and the distance between them. The amount of charge stored can be increased by adding more electrolyte to the plates which results in a larger capacitance.

TCG252U050N2L is a type of polarized electrolytic capacitor typically used in low-power, low voltage applications. The capacitance value ranges from 0.05uF to 2.0uF and its maximum operating voltage rating ranges from 6V to 50V. This type of capacitor is largely constructed of aluminum and the internal paper insulation is used to separate its two aluminum plates. Its maximum temperature rating is +105°C and its body size is 4.56 x 4.1mm.

In conclusion, TCG252U050N2L is a type of aluminum electrolytic capacitor used mainly in low-power, low-voltage applications. It is suitable for use in switching power supplies, motor controllers, surge protectors, and peak current/voltage limiters. Its working principle is based on the same principles as any other capacitor and its capacitance value ranges from 0.05uF to 2.0uF with a maximum operating voltage rating of 6V to 50V.

The specific data is subject to PDF, and the above content is for reference