TDA9801T/V1,118

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TDA9801T/V1,118 is a RF demodulator used to convert a signal captured from an antenna to the video signal format. It is a single chip that integrates a low noise amplifier (LNA), IF amplifiers, a quadrature demodulator, and video baseband Interference and Noise Reduction (AINR) circuitry into a single package. This is usually part of the electronic equipment for television, video cassette recorders, or car navigation systems. This demodulator works by taking a signal from an antenna or cable, amplifying it, and then converting it to a higher frequency signal. Then the signal is demodulated to the baseband level signal used by television.

The RF demodulator TDA9801T/V1,118 is comprised of several components. The AINR circuit is used to reduce interference and noise. The IF stage is used to convert the vacuum frequency of the signal into lower frequencies that can be processed by the demodulator. Then the quadrature demodulator is used to convert the signal to composite video. In addition, the LNA circuit is used to bolster the antenna signal before it enters the demodulator.

In operation, the antenna captures the radio frequency (RF) signal and this is first conditioned by the LNA, where the signal is amplified and filtered. Then it is sent to the IF stage, where the frequency is reduced to something the demodulator can handle. This is done by using a series of bandpass filters and amplifiers, and this is known as down-conversion. This signal is then sent to the quadrature demodulator, where a mathematical process called quadrature detection is performed. Quadrature detection is a type of modulation that changes an RF signal to a lower frequency signal; this is done by shifting the phase-shift of the original signal by 90 degrees. The result of this is a composite video signal. Finally, the AINR circuit is used to reduce interference and noise. This is usually done by using a digital filter.

In conclusion, the TDA9801T/V1,118 RF demodulator is an integrated circuit that can convert a signal from an antenna or cable into the composite video signal. It contains several components, such as the LNA, the IF stage, the quadrature demodulator, and the AINR circuit. Together, these components work to reduce interference and noise and convert the signal to composite video. The technology behind RF demodulators like the TDA9801T/V1,118 ensures the maximum use of the received signal.

The specific data is subject to PDF, and the above content is for reference