TEF6689HN/V102K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Receivers are electronic equipment used to receive radio frequencies from transmitters. A common example of a receiver is a television which gathers signals from a broadcast antenna. The TEF6689HN/V102K is one type of RF receiver, and this article will address the application field and working principles of the device.

The TEF6689HN/V102K receiver is typically used in automotive applications. Its main use is in car audio systems for satellite navigation, hands-free calling, and digital audio entertainment. It is also suitable for personal monitor systems, military tracking systems and vehicle control systems.

The TEF6689HN/V102K is a monolithic integrated dual-channel RF receiver. It has two channels of reception and can receive signals from two frequencies. It operates at a frequency range of 375 MHz to 845 MHz for the primary channel and 1195 MHz to 1450 MHz for the secondary channel. It has a noise figure of 5 dB in the primary channel and a noise figure of 7 dB in the secondary channel. The sensitivity of the device is 1 mV for the primary channel and 0.8 mV for the secondary channel.

The working principle of the TEF6689HN/V102K receiver is based on a combination of direct conversion and intermediate frequency (IF) processing. The receiver consists of two distinct parts: the antenna and the receiver section. The antenna receives the signal and converts it into an electric current. This current is then sent to the receiver section which consists of radio frequency amplifiers, filters, a local oscillator, mixers, and an IF strip.

The RF amplifiers in the receiver section amplify the signal received from the antenna. The filters then remove all frequencies that are not needed for the desired signal. The local oscillator produces a signal that is used to phase-lock the desired signal in the mixers. When this is done, the mixers produce an output signal whose frequency is equal to the difference between the signal received and the local oscillator. The IF strip performs the final frequency conversion and produces a demodulated signal as an output. This demodulated signal is what is finally sent to the audio processor or other downstream application.

In summary, the TEF6689HN/V102K is a monolithic integrated dual-channel RF receiver used mainly in automotive applications. It has two channels of reception and operates within a frequency range of 375 MHz and 845 MHz for the primary channel, and 1195 MHz to 1450 MHz for the secondary channel. The working principle of the device is based on a combination of direct conversion and IF processing.

The specific data is subject to PDF, and the above content is for reference