THA132M060AA1C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, sometimes referred to as "Al caps" are a type of capacitor that uses an electrolyte, typically a liquid or wet gel, between two electrodes made of aluminum. The electrolyte, or electrolytic solution, completes the circuit and conducts current between the aluminum electrodes. The aluminum electrolyte acts as both an electrical conductor and a dielectric material. As such, aluminum electrolytic capacitors are typically used for high-frequency applications, such as radio frequency (RF) signals, where they have a greater capacity and lower cost than ceramic capacitors.

The model THA132M060AA1C is a surface-mount aluminum electrolytic capacitor. It has an XLR-3 connector, a 400Vdc operating voltage, a tolerance of +/- 10%, and a 110µF capacitance value. The THA132M060AA1C capacitor is suitable for a wide range of applications, including but not limited to:
• LED lighting: As an LED light illuminates, it draws an electrical current which is stored by the capacitor and then released again to ensure a consistent level of illumination. This eliminates flickering and protects LED lights from damage.
• Automotive: These capacitors are used in automotive electrical applications, such as for starters, alternators, navigation systems, and car audio. They provide high-level noise suppression and power stabilization to protect sensitive electronics from voltage surges and power spikes.
• Computers: The THA132M060AA1C capacitor can be used in computers for short-term data buffering and memory storage. This allows for more efficient data transmission and shorter processing times, which helps to reduce costs.
• Power Supplies: The THA132M060AA1C is often used in power supplies. The capacitor helps to regulate voltage and clean the load, slow down current fluctuations, and protect the power supply from overloads and short-circuits.

The working principle of the THA132M060AA1C capacitor is based on the electrochemical reaction between the anode and cathode of the aluminum electrodes and the electrolyte solution. Aluminum is a good conductor of electricity, and the electrolyte is an excellent insulator. The combination of these two materials creates a voltage differential between the two electrodes, which produces a capacitance effect. When a positive charge is applied to one electrode, the other electrode is attracted by the negative charge, and the two electrodes are held at a close distance. This creates an electric field between the two electrodes, which stores an electrical charge.

The THA132M060AA1C capacitor is a surface-mount aluminum electrolytic capacitor, meaning that it has been designed to be soldered to a printed circuit board. This type of capacitor offers numerous advantages over other types of capacitors, including a higher capacitance value, higher operating voltage, and a smaller size. The THA132M060AA1C capacitor is ideal for applications where space is limited and high power is required, such as in power supplies or LED lighting.

The specific data is subject to PDF, and the above content is for reference