TIC201M-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, also known as silicon controlled switches, are a special type of transistor used in power electronics for digital switching applications. Triacs, a type of thyristor, are components used in a variety of applications, from switching motors to producing theatrical special effects. A triac is a three-terminal ac switch, typically used in the control of the speed and torque of motors, the dimming of lights, and the control of power in lighting systems. The TIC201M-S is a TO-252 package, sensitive gate triac.

The TIC201M-S uses a single thyristor and has three terminals: main terminal 1 (MT1), main terminal 2 (MT2), and gate (G). MT1 and MT2 are connected to the AC supply voltage, while the G terminal is the input terminal, and is used to control the device. When the gate voltage, VGT, is lower than the gate-trigger voltage, VGT(MT2-MT1), the triac will not be triggered. When VGT is greater than VGT(MT2-MT1), the triac will be triggered and current will flow between MT1 and MT2.

The TIC201M-S can be used in a variety of applications, such as motor speed and torque control, lighting dimming, switch-mode power supplies, and appliance control. It is also suitable for use in medium-power, low-cost applications, including light dimmers, motor controllers, power supplies, lighting controllers, and temperature controllers.

In motor control applications, the TIC201M-S triac can be used to control the speed and torque of the motor by modulating the applied voltage. When a voltage is applied to the gate terminal, the triac is triggered, which results in the flow of current between MT1 and MT2. This current flow causes the motor to run at the desired speed or torque level. When the voltage applied to the gate terminal is adjusted, the current flowing between MT1 and MT2 is also adjusted, resulting in a corresponding change in the speed or torque of the motor.

In lighting applications, the TIC201M-S can be used to dim the intensity of light by modulating the voltage applied to the gate terminal. When the voltage applied to the gate terminal is reduced, the current flowing between MT1 and MT2 is also reduced, resulting in a reduction of the intensity of the light. The TIC201M-S can also be used in switch-mode power supplies, where it is used to control the on/off status of the output voltage. When a voltage is applied to the gate terminal, the triac is triggered and current flows between MT1 and MT2, allowing the output voltage to be switched on or off. In appliance control applications, the TIC201M-S can be used to control the on/off status of a variety of household appliances, such as refrigerators, air conditioners, and washing machines.

In summary, the TIC201M-S is a sensitive gate triac that can be used in a variety of applications, including motor control, lighting dimming, switch-mode power supplies, and appliance control. By applying a voltage to the gate terminal, the TIC201M-S can be used to control the speed and torque of motors, dim the intensity of lights, switch the output voltage on or off in switch-mode power supplies, and control the on/off status of household appliances.

The specific data is subject to PDF, and the above content is for reference