TIC206D-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - TRIACs are components that regulate electrical currents in electronic circuits from alternating current (AC) to direct current (DC). They are used in a variety of electronic circuit applications, from industrial, consumer and home appliances to circuits used for communication and entertainment. The TIC206D-S is a type of thyristor-TRIAC that is used for controlling AC power, mostly for switching and dimming control.

The TIC206D-S thyristor-TRIAC is a three-terminal device. The terminals are designated "M", "G" and "T" which stand for Main, Gate and Trigger respectively. The Main terminal is connected to the AC line and the other two terminals are utilized to control the amount of power transferred through the device when triggered. The current through the device is controlled by applying a voltage to the Gate terminal that is sufficient to turn on the device. The Trigger terminal is used to synchronize the switching of the thyristor-TRIAC. This is accomplished by applying a signal that is independent of the voltage of the main terminal.

The control voltage at the Gate terminal of the TIC206D-S turns it on and off. The Gate current must be sufficient to turn the device on but not too high to cause damage to the thyristor-TRIAC. The Gate-Trigger voltages are required to be at least 5V for proper operation. The maximum Gate-Trigger voltage is limited to 40V. The Gate current is from the trigger source and is limited to 0.5mA.

The TIC206D-S has two ways of controlling the amount of current through the device when triggered. The current can be controlled with a “phase control” or “zero crossing” mode. In “phase control” mode, the current can be controlled before it reaches its peak value. This is accomplished by applying the gate voltage at a specific instant of the half-cycle. In the “zero crossing” mode, the current can be switched on or off at exactly the zero crossing of the AC line. This is because the trigger signal to the TIC206D-S is delayed and synchronized with the zero crossing of the line.

In addition to being used in AC power control applications, the TIC206D-S can also be used in motor speed control. It can also be used to control rectifiers and filters that are used to convert AC power to DC power. It is versatile enough to be used in a variety of applications, from consumer electronics to industrial power control systems.

To summarize, the TIC206D-S is a thyristor-TRIAC that is used for controlling alternating current power. It is capable of controlling current before it reaches its peak value in “phase control” mode, and switching on or off at the zero crossing in “zero crossing” mode. The Gate-Trigger voltages required for proper operation are from 5 to 40V and the Gate current is limited to 0.5mA. The device can also be used in motor speed control, rectifier and filter control. Lastly, it is versatile enough to be used in a variety of applications, from consumer electronics to industrial power control systems.

The specific data is subject to PDF, and the above content is for reference