TIP41CTU

Series:	--
Packaging:	Tube
Part Status:	Active
Transistor Type:	NPN
Current - Collector (Ic) (Max):	6A
Voltage - Collector Emitter Breakdown (Max):	100V
Vce Saturation (Max) @ Ib, Ic:	1.5V @ 600mA, 6A
Current - Collector Cutoff (Max):	700µA
DC Current Gain (hFE) (Min) @ Ic, Vce:	15 @ 3A, 4V
Power - Max:	2W
Frequency - Transition:	3MHz
Operating Temperature:	150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-220-3
Supplier Device Package:	TO-220-3
Base Part Number:	TIP41

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
The TIP41CTU is a NPN General Purpose Power transistor, which is not just capable of implementing robust power amplitude handling, but also provide a wide array of additional functions, including high gain, high voltage and power audio applications. This transistor type is particularly ideal for automotive applications due to its high reliability and performance ratings. The TIP41CTU is a single bipolar junction transistor and therefore is suitable for a variety of different uses, from switching and amplifier circuits. This article will provide an overview of the applications and the device’s working principle.
TIP41CTU application
The TIP41CTU can be used for several different purposes, but two of the most common uses are in amplifier circuits and switching circuits. In amplifier circuits, this type of transistor can be used to increase the power of an audio signal, which can be used in a variety of audio systems, from home theater systems to car audio. Additionally, because of its low power consumption it can be used in higher power applications such as voltage regulators.
In switching circuits, the TIP41CTU can be used to switch power and electrical signals. This type of transistor is ideal for use in automotive applications, due to its ability to handle higher voltages and power. Furthermore, the TIP41CTU is specifically designed for high gain applications and is therefore suitable for high voltage, high power applications. Additionally, the TIP41CTU can be used as an amplifier device in order to increase the current and the voltage output, which is useful for applications such as power amplifiers.
Working Principle
The working principle of the TIP41CTU is based on the operation of bipolar transistors. Bipolar transistors are also known as BJT’s (bipolar junction transistors) and are made up of three sections: the emitter, the base, and the collector. In a BJT, the current flows between the emitter and the collector and is controlled by the base region. The current flowing through the TIP41CTU are determined by the base voltage, which can be adjusted to vary the current and power output from the device.
A typical TIP41CTU will consist of three pins, one each for the base, the emitter and the collector. The base is the controlling element for the transistor; it is connected to a voltage source and the base-emitter junction is the controlling element for the transistor. The voltage applied to the base will control the current flowing from the collector to the emitter and vice versa.
The TIP41CTU has a maximum power dissipation of 40 watts and can handle voltages up to 900V. This makes the device capable of handling power signals consistently without suffering any damage. Furthermore, the device features a high gain, a wide range of voltage rating (up to 900V), and a power gain of 80 decibels at 3 to 5 volts. This transistor type is suitable for applications that require a high power output, such as automotive, power switching and audio applications.
Conclusion
The TIP41CTU is a single bipolar junction transistor which is capable of low power consumption, high voltage and power audio applications. It can be used for amplifier circuits and switching circuits, as well as a variety of other applications. The TIP41CTU appliance operates on the principle of bipolar transistors with three connections (emitter, base and collector), and the base being the controlling element. It can handle power signals up to 40 watts, and with its high gain, it is suitable for use in automotive, power switching, and high voltage applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description