TISP4145H3LMFR-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Suppressor) devices normally referred to as Thyristors are used for protection against lightning strikes, electrostatic discharges, and power surges. Thyristors provide a fast response and are considered to be the most reliable type of overvoltage protection when it comes to surge protection.

TISP4145H3LMFR-S is a high frequency, dual silicon, ultrafast, high voltage, surface mount, unidirectional Thyristor that is rated for high voltage handling up to 3,500V with a maximum surge voltage of 6,000V. It is designed to reduce system response time and increase durability against surge events. It has a high temperature range of -40°C to 110°C and can operate in high frequency environments up to 350MHz.

The TISP4145H3LMFR-S has two gate connections, one for each thyristor. It is designed to clamp the voltage applied across it to a safe level above its specified maximum surge voltage. When a voltage is applied across the cathode and anode of the device, it will measure the starting voltage current at its specified maximum surge voltage. Once the voltage gets too high, then the Thyristor device will activate and clamp the voltage to a safe level. The device will then reset once the voltage has dropped back below its maximum surge voltage.

The basic operation of the TISP4145H3LMFR-S is to conduct or block the current depending on the voltage applied across it. It will clamp the voltage to a safe level whenever it exceeds its maximum surge voltage. This makes the TISP4145H3LMFR-S an ideal choice for applications involving power surges or electrostatic discharges. These devices are typically used in a variety of applications including automotive, industrial, communications, consumer electronics, and military/defense.

Due to its high voltage and surge capabilities, the TISP4145H3LMFR-S is ideal for both high voltage surge protection devices and pulse suppression devices. It is designed to clamp high voltage surges and reduce the effect of the surge in order to protect sensitive equipment from costly damage. It is also used in long lines and pulse generators as its high frequency capabilities help improve signal transmission and reduce noise in pulse generator and transmission applications.

The TISP4145H3LMFR-S is designed to provide fast response times with increased durability against surge events. With its high voltage and surge capabilities, it is the perfect form of overvoltage protection for surge protection devices and pulse suppression devices alike. Its high temperature range and high frequency capabilities make it the perfect choice for everyday applications.

The specific data is subject to PDF, and the above content is for reference