TISP4290H3LMFR-S Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are three-terminal semiconductor components that rely on a current anode to control the flow of current through the other two terminals. In the case of a TISP4290H3LMFR-S the current anode is a gate lead, and the other two terminals are a cathode and an anode. The device utilizes the flow of current through the terminals to control the voltage that appears across the two terminals. This is accomplished by the thyristor turning on and off in response to changes in the current flow.The TISP4290H3LMFR-S is a surface mount thyristor which makes it suitable for use in printed wiring boards and thick film applications. It is designed to operate in medium to high power applications as it supports up to 3 A at up to 60V. In addition, the device has a very low operating current of only 20μA and a relatively low on state voltage of 1.1V. The TISP4290H3LMFR-S is typically used in consumer electronics and industrial applications. For example, it is often used for battery charging, voltage regulation, and power switching applications. In addition, it can be used to control current in motor drives, audio amplifiers, and even telecommunications systems. When using the TISP4290H3LMFR-S, proper precautions must be taken in order to avoid damage to the device. It is important to ensure that the operating temperature does not exceed 125 degrees Celsius, as this could lead to permanent damage. It is also important to ensure that the device is properly grounded and that the anode-to-cathode voltage does not exceed the ratings given in the datasheet. The TISP4290H3LMFR-S works on the principle of a Silicon Acquisition Switched Thyristor (SAST). This device is composed of two junction diodes connected in an anti-parallel fashion. When a control voltage is applied to the gate lead, a current will flow through the device, allowing the two diodes to conduct. In this way, the device acts as a switch and will allow current to pass through it when the gate voltage is applied. The TISP4290H3LMFR-S is a versatile device that is well suited for a variety of applications. Its low operating current, high current handling capacity, and low on state voltage make it a valuable tool for power control and switching applications. In addition, its surface mount design makes it suitable for use in printed wiring boards and thick film applications. With proper precautions, the TISP4290H3LMFR-S can be an important asset in any circuit or system.

The specific data is subject to PDF, and the above content is for reference