TL1431CLPME3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TL1431CLPME3 is a 2-terminal adjustable voltage reference chip offered by Texas Instruments. It is part of the Precision Voltage Reference family of Precision Voltage Reference, often referred to as PMIC (Power Management Integrated Circuit). It provides a maximum output voltage of 11V with a current consumption of no more than 10mA.

TL1431CLPME3 is made of low-level current components, and its operating temperature range is -40 to 125 degrees Celsius. It supports 2.5V to 11V reference voltage output, which is constantly adjustable and has a very low noise output. The output accuracy for this device is typically very tight at ±0.4%, which makes it suitable for use in high-accuracy applications where accuracy is essential.

The TL1431CLPME3 is widely used in consumer and industrial devices such as power supplies, instrumentation, and process control applications. It is designed to provide a stable reference voltage for accurate voltage regulation and control in voltage regulator circuits, over-voltage protection circuits, and current limiters. In situations when the output voltage needs to be tuned to an exact voltage level, the TL1431CLPME3 can be used to maintain a constant output voltage, regardless of load or line variations. This feature makes it a valuable component in many different types of applications.

The working principle behind the TL1431CLPGME3 is quite simple. The voltage reference is achieved by using the diode-connected bipolar junction transistor. The device consists of a high-voltage PNP transistor connected in reverse direction, with a zener diode connected between the base and emitter. The voltage across the zener diode and the current through it set the reference voltage across the two terminals. As the device only uses two transistors and two resistors, it is relatively simple yet highly efficient, at the same time.

The TL1431CLPGME3 has also proven itself to be a dependable, low-cost solution for a variety of applications that require accurately regulated voltages. Its features make it ideal for a variety of applications in consumer electronics, biomedical and automotive industries, as well as for more demanding applications such as telecommunications and military applications. In applications where low-cost and high accuracy are important, the TL1431CLPGME3 can be a good option.

The TL1431CLPGME3 is also very easy to use, as it requires only a few simple steps to set up. Its simple design and its low-cost manufacturing process make it a great choice for cost-sensitive applications. The decision to go with the TL1431CLPGME3 should be carefully considered, due to the fact that the accuracy and stability of the reference voltage are incredibly important in many applications.

In conclusion, the TL1431CLPGME3 is a great choice for many applications, as it provides a more stable, accurate and low-cost solution for referencing voltages. Its features make it ideal for many different types of applications and its simple design makes it an easy-to-use and cost-effective solution. Just ensure to carefully consider its features before deciding to go with the TL1431CLPGME3.

The specific data is subject to PDF, and the above content is for reference