Allicdata Part #: | TLH5014HN/V1WK-ND |
Manufacturer Part#: |
TLH5014HN/V1WK |
Price: | $ 0.69 |
Product Category: | Uncategorized |
Manufacturer: | NXP USA Inc |
Short Description: | ALNA FM ONLY |
More Detail: | N/A |
DataSheet: | TLH5014HN/V1WK Datasheet/PDF |
Quantity: | 1000 |
2450 +: | $ 0.62916 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The TLH5014HN/V1WK is a power optocoupler which consists of an AlGaAs LED optically coupled to a high speed integrated circuit (IC) with an output transistor. It is designed for use in low voltage applications, such as DC motor control, and can handle up to 500mA of current. The TLH5014HN/V1WK is a compact, efficient device that offers a wide range of applications for interfacing signals and controlling power from an external source, including industrial and commercial applications as well as general consumer electronics.
The TLH5014HN/V1WK is ideal for low voltage, high power, and high-speed applications, such as DC motor control, LED lighting, and HVAC control systems. It is also suitable for power driver applications, such as AC/DC power supplies. The TLH5014HN/V1WK is available in both 5.0 and 7.0 Volt versions, with a guaranteed dynamic response time of 10ns. The TLH5014HN/V1WK has an optically coupled input of LED plus resistor and an output transistor with open-collector, high-speed DC-switching characteristics.
The TLH5014HN/V1WK is a stand-alone unit, with a built-in safety circuit that includes both input and output protection circuits. The input side of the device includes an ESD (electrostatic discharge) protection circuit, which can absorb electrical discharges up to 8KV, and a reverse polarity protection circuit. The output side protection circuit includes an over-current and over-voltage protection circuit, which can protect the device from short circuits and high voltage transients.
The TLH5014HN/V1WK is designed to efficiently transfer power from an external power source to a controlled application. It works by converting the current from the external power source into a voltage control signal, which is used to drive the output transistor. The output transistor acts as an on/off switch to control the power supply to the application. When the voltage is low, the output transistor is in the off position, thereby preventing the power supply from reaching the application. In the on position, the output transistor supplies the current through the optocoupler to the application.
The TLH5014HN/V1WK is a reliable and efficient device that can be used for a variety of control and signal-based applications. Its compact size and ease of installation make it ideal for industrial and consumer electronics applications. Additionally, its good current and high speed response times make it suitable for high power and high-speed applications. Therefore, the TLH5014HN/V1WK is a versatile device that can be used in a wide range of applications for both industrial and commercial settings.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TLH5016HN/V1WY | NXP USA Inc | 0.95 $ | 1000 | ALNA2 |
TLH5016HN/V1WK | NXP USA Inc | 0.98 $ | 1000 | ALNA2 |
TLH5018HN/V1WY | NXP USA Inc | 1.11 $ | 1000 | ALNA1 |
TLH5018HN/V1WK | NXP USA Inc | 1.16 $ | 1000 | ALNA1 |
TLH5014HN/V1WY | NXP USA Inc | 0.67 $ | 1000 | ALNA FM ONLY |
TLH5014HN/V1WK | NXP USA Inc | 0.69 $ | 1000 | ALNA FM ONLY |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE