Allicdata Part #: | TLH5018HN/V1WK-ND |
Manufacturer Part#: |
TLH5018HN/V1WK |
Price: | $ 1.16 |
Product Category: | Uncategorized |
Manufacturer: | NXP USA Inc |
Short Description: | ALNA1 |
More Detail: | N/A |
DataSheet: | TLH5018HN/V1WK Datasheet/PDF |
Quantity: | 1000 |
2450 +: | $ 1.04390 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The TLH5018HN/V1WK is a dual 4:1 frequency translation multiplexer/demultiplexer designed for use in a variety of applications. The device is designed to provide a quick and easy way to multiplex multiple input signals into one output, while demultiplexing the signals to separate outputs.
The device is made up of two identical 4:1 frequency translation multiplexers; one for multiplexing and one for demultiplexing. Both sections are controlled by the same instruction set. The frequency translation is accomplished by using four switches in each section. These switches control the frequency range of the input signal, allowing it to pass through or be blocked from the output.
The TLH5018HN/V1WK can be used in a variety of applications, such as in television broadcasting, where it can be used to switch between multiple channels or video streams. It can also be used in radio communications, allowing for the transmission of multiple audio signals on the same frequency. Additionally, the device can be used as a switch for a variety of data streams such as mobile phone data, video, or Ethernet.
The working principle of the TLH5018HN/V1WK can be broken down into two parts. The first part is the clock. This clock sends out pulses at a certain frequency. The frequency of these pulses is determined by the user. When the clock is switched on, the output is controlled by the logic state of the clock. This means that when the clock is in the logic high state, the signal will be enabled; when it is in the logic low state, the signal will be disabled.
The second part of the working principle is the multiplexer and the demultiplexer. These two units work in tandem. The multiplexer receives the input signal and selects exactly one of the four frequency ranges. It then passes on the output to the demultiplexer. The demultiplexer then separates out the output to provide multiple outputs. Each of the four outputs can be adjusted so that they correspond to the correct frequency range.
In summary, the TLH5018HN/V1WK is a dual 4:1 frequency translation multiplexer/demultiplexer that can be used in a variety of applications, such as television broadcasting and radio communications. Its working principle consists of a clock, a multiplexer, and a demultiplexer, working together to provide multiple outputs from a single input. This device is extremely useful in providing multiple streams of data on the same frequency while also allowing for a quick and easy way to switch between them.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
TLH5016HN/V1WY | NXP USA Inc | 0.95 $ | 1000 | ALNA2 |
TLH5016HN/V1WK | NXP USA Inc | 0.98 $ | 1000 | ALNA2 |
TLH5018HN/V1WY | NXP USA Inc | 1.11 $ | 1000 | ALNA1 |
TLH5018HN/V1WK | NXP USA Inc | 1.16 $ | 1000 | ALNA1 |
TLH5014HN/V1WY | NXP USA Inc | 0.67 $ | 1000 | ALNA FM ONLY |
TLH5014HN/V1WK | NXP USA Inc | 0.69 $ | 1000 | ALNA FM ONLY |
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE