TLP183(GB-TPL,E Isolators

Output Type:	Transistor
Supplier Device Package:	6-SO, 4 Lead
Package / Case:	6-SOIC (0.179", 4.55mm Width), 4 Leads
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C
Vce Saturation (Max):	300mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.25V
Current - Output / Channel:	50mA
Voltage - Output (Max):	80V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	2µs, 3µs
Turn On / Turn Off Time (Typ):	3µs, 3µs
Current Transfer Ratio (Max):	600% @ 5mA
Current Transfer Ratio (Min):	100% @ 5mA
Voltage - Isolation:	3750Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The TLP183 is a type of optoisolator known as a Transistor, Photovoltaic Output (TPO). It is manufactured by Toshiba and allows electrical isolation between two circuits. This means that the I/O signals cannot be leaked or conducted through the common ground. By doing this, it helps protect circuit boards from damage from high voltages.

Features & Benefits

The TLP183 has a few features that make it stand out among other optoisolators. First, it operates by absorbing transmitted light instead of emitting light, which eliminates the need for a phototransistor. It also comes in a small package size (NDIP-4, DIP-4) which is perfect for design boards with limited space.In addition, the TLP183 has extremely low signal output, which is below 1mA. This helps to prevent interference from high-frequency electric signals without having to use a filter. The optoisolators also has a wide operating range (85°C to 105°C) allowing it to be used in a variety of different applications.

Installation & Application Field

The TLP183 comes in a package that requires a standard soldering process for installation. Once it\'s mounted, the optoisolator can be used in a range of applications such as automotive systems, industrial control systems, railway systems, and telecommunications systems. It can also be used in logic signal transmission in medical equipment, digital signal isolation in audio/video equipment, and control of various sensors in home automation systems.

Working Principle

The TLP183 operates by transmitting light signals of a specific wavelength from the input circuit to the output circuit. The light signals are converted into electrical signals by the optical components inside the package, which are then output to the desired destination.The package contains an LED, a photodiode, a base resistor, and a voltage regulator. The LED emits light signals, which are detected by the photodiode and converted into electrical signals. The base resistor helps limit the current flow on the input side, and the voltage regulator prevents any fluctuations in the output.

Conclusion

The TLP183 Transistor, Photovoltaic Output optoisolator is a great device for use in isolated electrical systems. It is easy to install, has low power consumption, and can be used in a wide range of applications. The optoisolator converts light signals into electrical signals and is able to provide electrical isolation in a cost-effective manner.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description