TLP5754(TP,E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLP5754 is a single channel photocoupler with high isolation voltage of >3.75kVrms. It belongs to the Isolators - Gate Drivers category of products. Typically it is used in applications where an isolated gap is needed between the input and output circuitry, providing a high level of protection for the load.

The primary use of the TLP5754 is in motor control. Its isolated gate drive allows a single signal to drive multiple motor control devices. Its high speed switching time and noise reduction ensures fast and precise control. TLP5754 can also be used as an electronic gate drive for driving bipolar transistors.

The principium of operation of the TLP5754 is as follows. An infrared light-emitting diode (LED) inside the device emits a light signal when current is applied. The receiver Photo IC detects the LED and controls the output transistor with the received signal. The output voltage is regulated at a fixed voltage regardless of temperature changes.

The TLP5754 features diverse protection circuits for protecting the device from damage in the event of a high-voltage surge or ESD. The VCC pin is fitted with a TVS diode, which can be used for further protection when connected to a TVS-equipped circuit. An over-current protector is printed on the back of the device to prevent overvoltage damage caused by heat buildup. The device also has an internally integrated temperature monitor that can halt the circuit when the temperature rises above a certain level.

TLP5754 has a wide operating temperature range from -40C to +105C. It has an integrated filter, which can reduce external noise generated by the circuit. The device also has an overload protection feature that prevents GND short circuits due to high load current.

The advantages of using the TLP5754 include an easy-to-use, compact, cost-effective solution for driving applications with a wide variety of DC and AC motors, bipolar transistors, and other control components. Its high isolation voltage between input and output - more than 3.75kVrms - ensures a safe operation and reliability of the circuit. The device is also resistant to noise due to its integrated filter, and its overload protection feature prevents short circuits due to high load current.

The specific data is subject to PDF, and the above content is for reference