TLV71733PEVM-072

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TLV71733PEVM-072 is a Evaluation boards device related to the Linear Voltage Regulators, with a comprehensive portfolio of LDOs. That combines high performance, high accuracy, low dropout, low noise, low power, and high temperature as well as other desirable specifications and features. The Linear Voltage Regulators are devices that provide a desired voltage to an electrical system from a higher voltage source. Linear voltage regulators are typically used when someone needs a precise voltage for their application. The TLV71733PEVM-072 features a 3A µCap LDO with Vin up to 28V.

The TLV71733PEVM-072 Evaluation boards has three main sections: the power block, the feedback and control loop, and the protection and protection controller. The power block is where energy conversion takes place; the high-voltage source is converted to the desired output voltage. The feedback and control loop takes measurements, makes decisions, and implements control actions. Lastly, the protection and protection controller block work together to ensure the user circuit is protected from short-circuit or overload conditions.

In the power block, the main difference between a traditional voltage regulator and the TLV71733PEVM-072 is the addition of bulk capacitors. The bulk capacitors provide filtering that allow the voltage regulator to reduce voltage ripple, even when presented with large load and input voltage variations. It also ensures the accuracy of the output voltage is maintained across temperature and load variations.

The feedback and control loop of the TLV71733PEVM-072 consists of the primary regulator, voltage feedback, error amplifier, and control logic. The primary regulator receives the input voltage and steps it down to the regulated output voltage as per the instructions given by the external error amplifier. This error amplifier is used to compare the output voltage signal with the voltage feedback and issue corrections instructions to the primary regulator if needed.

The protection and protection controller block consists of an over-voltage protection circuit, a soft-start circuit, an under-voltage lockout circuit, and a power-on reset circuit. The over-voltage protection circuit is used to detect high input voltage and quickly shut the primary regulator off until the voltage drops below the acceptable level. The soft-start circuit prevents the device from drawing too much current at power on. The under-voltage lockout circuit shuts the device off when the input voltage falls too low. Finally, the power-on reset circuit ensures the primary regulated remains off until the power is stable.

The TLV71733PEVM-072 Evaluation boards offer an excellent solution for applications requiring precision outputs from a high voltage source. It can provide power from an extended input range and provides protective features to ensure safe operation. With its low noise, low power, and high temperature features, the TLV71733PEVM-072 Evaluation boards is ideal for high precision power systems in various applications.

The specific data is subject to PDF, and the above content is for reference