TMS370C742AFNTG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TMS370C742AFNTG4 is an example of a modern high performance microcontroller. It is part of the Motorola Data Converter and Communications (DCC) family and is targeted at embedded control and industrial process control applications. This microcontroller is an 8 bit device with 32K byte on-chip Flash memory, up to 16K byte of external RAM, on-chip A/D and D/A converters, and an integrated CAN controller.

The TMS370C742AFNTG4 provides several benefits for embedded control and industrial process control applications. Firstly, it has competitive performance. It has a maximum system clock frequency of 40 MHz and is capable of executing up to 5 instructions per cycle. Secondly, it has a wide range of internal peripherals including up to four 16-bit timers, watchdogs, and up to four serial communication ports supporting both synchronous and asynchronous communications. Thirdly, it has a rich instruction set with both 16-bit and 32-bit instructions for manipulating data, program memory and peripherals. Finally, the TMS370C742AFNTG4 has low power consumption and is available in multiple package types including a 100 pin plastic dual in-line package (PDIP) and a 100 pin plastic quad flat pack (PQFP) package.

The workings of the TMS370C742AFNTG4 are fairly straightforward. The microcontroller uses a Harvard-architecture with separate data and program memories. The 32K byte of on-chip flash memory is used to store the program code and the 8K byte of RAM is used to store data. The TMS370C742AFNTG4 is powered by a 40MHz system clock and can execute up to 5 instructions per clock cycle. A single interrupt line is used to signal when an interrupt has been generated. The TMS370C742AFNTG4 also has an integrated CAN controller capable of supporting standard and extended frames.

TMS370C742AFNTG4 microcontroller is suited for a variety of embedded control and industrial process control applications. For example, the microcontroller can be used for controlling pumps and motors in industrial process control systems. It can also be used in automotive applications such as engine controls, transmission controls, and brake system controllers. The integrated CAN controller can be used to communicate with other CAN enabled devices such as sensors and actuators. The TMS370C742AFNTG4 can also be used in robotic applications such as humanoid robots.

In short, TMS370C742AFNTG4 microcontroller is a highly capable microcontroller suitable for a variety of embedded control and industrial process control applications. It has competitive performance, a wide range of internal peripherals, and a rich instruction set. In addition, it has low power consumption and is available in multiple package types. Therefore, the TMS370C742AFNTG4 is an ideal choice for embedded control and industrial process control applications.

The specific data is subject to PDF, and the above content is for reference