TPS2023DRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS2023DRG4 is a device primarily used by power distribution switch systems. It is ideal for use in powertrain and low power consumption systems. It is an integrated power management and load switch IC, with a low on-resistance of 18mΩ which makes it ideal for high efficiency distribution. Its wide range of operating voltages and its low operating current of 160µA makes it very efficient in power applications.

The device features six independent channel, allowing use in a range of applications. The channels, which can be activated/deactivated independently, can switch large amounts of charge. The device includes a ground connection point and logic GND pin, allowing the channels to be controlled by one controlling device. It has a current operating range of 1 mA to 16A.

The TPS2023DRG4 uses an advanced power management strategy to reduce power consumption, allowing it to be used in battery powered systems. It is also equipped with a slew-rate control function, allowing it to be switched off more quickly and thus reducing the voltage overshoot in battery powered systems. In addition, it has an over-voltage protection output which will protect the load if the input voltage is outside of the specified operating range.

The main feature of the TPS2023DRG4 is its working principle. It uses a built-in power switch that is activated by a logic output signal. The logic output signal drives the associated MOSFETs, turning them on and off. The logic output can be in the form of control signals such as voltage levels, frequency, or pulse width modulation. This allows the device to be used for both controlling the input power or for controlling the output current.

In addition to controlling the power or current, the TPS2023DRG4 provides an over-voltage and short circuit protection system. The over-voltage protection system is triggered when the input voltage exceeds the maximum operating range, and it will shut down the output to protect the load. The short-circuit protection is triggered when the input exceeds the rated operating range and can shut off the output current if the current is too high.

The TPS2023DRG4 is a device designed to be used in power distribution switch systems and is an ideal solution for low power consumption applications. It is equipped with a slew-rate control function, an over-voltage protection circuit, and an integrated power switch that can be controlled by a logic output. It is capable of switching currents up to 16A and is considered an efficient device due to its low operating current of 160µA.

The specific data is subject to PDF, and the above content is for reference